Daiso flushing photos

[WTS][ON]WE C8A3 Build

2023.06.05 06:28 antonioshamoun [WTS][ON]WE C8A3 Build

Gbbr
C8A3
Placeholder price is $1000 since listings need a price but send me an offer.
All parts are genuine unless stated otherwise and this is one of the better replicas out there
First things first, trigger mech needs to be replaced as it shoots auto on semi, was never a problem for me as I don’t game.
Builds List include:
1.G&G Triad with OD rail covers
2.HAO Ambi mag release(needs filing to be flush)
3.VFC Ambi fire selector
4.Diemaco style ambi claw charging handle latch
5.Barrel extension(not accurate)
6.Also includes cleaning kit storage in grip & barrel plug
7.Repro eotech(batteries inc)
8.Flip up rear sight
9.Genuine Diemaco Handguards, Pistol grip, stock & sling plate $$$
All this build is needs for completion is the correct barrel sleeve.
Can send more photos & videos upon request. Some of the parts used on this build are sought after throughout all of North America for airsoft and real firearms so please don’t waste my time or lowball me.
submitted by antonioshamoun to airsoftmarketcanada [link] [comments]


2023.06.05 04:14 anonAcc1993 American Manhunt: The Boston Marathon Bombing.

I enjoyed the documentary, and some things jumped out to me.
  1. The breaks in the case came from two civilians, despite the amount of resources used by the FBI and BPD
  2. The photos were definitely leaked by the commissioner, but looking at point 1. I do not think they were even close to IDing them. It flushed them out and the bombers made mistakes from then on out.
  3. LE looked a step behind, unorganized, and anxious. They could not perform a simple grid search despite the amount of resources at their disposal.
  4. I didn’t see a mention of the fact that Tamerlan was on two terror watchlist, and was able to re-enter the country without any additional screening. To be fair, the reasons for this involved mundane tech issues, but it has been suggested that he was an informant.
  5. It seems the Olympics and citizenship played a role in his radicalization.
submitted by anonAcc1993 to netflix [link] [comments]


2023.06.05 00:23 Honest-Fail-9762 Please help no answers. Night sweats, unbelievable pain and skin issue (included pic)

(26/F) 110 5’5 I’m going to the doctor this week and could use input to bring before I go in for my new doctor change.
Prescribed synthroid for hypothyroid Prescribed Valtrex when I have shingles outbreak
I have been dealing with terrible symptoms for the past 5 years that has increased over time. However, the past year has taken the turn for a worse.
I am having - night sweats every night that are so bad I have to change my sheets. - stabbing pain in the middle of my back - sudden muscle weakness or numbness especially in the legs - random growths in my body that still need to be biopsied (boney growth in my jaw, some sort of growth along the cheek bone area felt in the sinuses, growth removed from my breast which was fibrous, signal abnormality on iliac with cortical irregularities) - high heart rate - flushing and joint swelling which is negative for RA - ground glass opacity in lung - inability to fight infections well - permanently dilated pupils - high high triglycerides which is familial - weight loss of 30 lbs in 2 years - severe bruising all over - random spots of pinprick rashes with bruises I added photo
https://imgur.com/a/S4EWv16
submitted by Honest-Fail-9762 to AskDocs [link] [comments]


2023.06.04 23:39 MallyMeeple Help with make up bags!

Help with make up bags!
Hello; it's my first time posting and I'm in need of help.
I got a couple of sewing lessons a few years ago when I first got into sewing and my teacher taught me how to make these cute little make-up bags. Now I've come to make them again a long while later and they've been somewhat successful but the zips don't look right and sit flush with the edges of the bag... See pics. What am I doing wrong please? I never got any written instructions, so I'm just going from photos I took at the time...
Thanks for any help; I'm making these are gifts so really want them to look as sharp as possible.
submitted by MallyMeeple to SewingForBeginners [link] [comments]


2023.06.04 23:38 MallyMeeple Help with make up bags

Hello; it's my first time posting and I'm in need of help.
I got a couple of sewing lessons a few years ago when I first got into sewing and my teacher taught me how to make these cute little make-up bags. Now I've come to make them again a long while later and they've been somewhat successful but the zips don't look right and sit flush with the edges of the bag... See pics. What am I doing wrong please? I never got any written instructions, so I'm just going from photos I took at the time...
Thanks for any help; I'm making these are gifts so really want them to look as sharp as possible.
submitted by MallyMeeple to sewhelp [link] [comments]


2023.06.04 19:25 cecinestpasune2 Something feels wrong?

Something feels wrong?
Hello! This is my first hydro grow, and I think something is wrong? Maybe not, but I dunno. So this is my setup, from Vivosun. The pump runs for five minutes every hour, at least 12 hours of grow lights (I should probably do more, I know…) The two back rows are buttercrunch lettuce and the front two are romaine. I’m using the light feed measurements of the three from general hydroponics nutrients.
This will be their fourth week. I was told that you give nutrients every two and do a full water an new nutrients every four, so this Thursday is their first full flush. I’m using distilled water, 4 gallons.
They’re sitting high out of their sponges, which I think if my fault, maybe I didn’t put them down far enough? But some are really listless and some seem okay. In the one photo, I’m seeing some of them have these white spots on the sponge, I’m not sure if that’s okay?
Taking a look over my setup, can you give me any bright spots or red flags? I’m a newbie and I’m reading some books, but I have no one to consult in my area and I beg the wisdom of the hive mind. Thank you!
submitted by cecinestpasune2 to Hydroponics [link] [comments]


2023.06.04 15:41 B0R0T3S Holes in prints

Holes in prints
Hi guys,
Since the beginning of the year I have the Neptune 3 Pro. It's my first 3D printer and so far I'm having a lot of fun with this hobby. I have already printed numerous finished models and even created a few myself. Mainly I use it for functional parts that simplify my life.
I had a lot of fun tinkering with the printer in the beginning, but now it's getting too much. There is always room for improvement, which is generally not a bad thing, but when you get stuck at certain points, it becomes frustrating.
The N3P has been described as very beginner-friendly, and it is. However, 3D printers themselves have very high maintenance and not everything can be solved on your own as a newbie. So I wanted to ask you guys for advice on a problem.
My prints looked "perforated" which is probably due to under extrusion. Right at the beginning, due to tangled filament, my extruder broke and was replaced by the manufacturer. I installed the new one and set it up again. Since then I am printing my models.
As slicer I use the current version of Cura (5.3.1) with the preset values of "Naruto". As material I use Polymaker "PolyTerra" PLA, which comes on a cardboard spool. I store the spools in an airtight box with a kilo of silica gel now. The printer is in a well ventilated storage room at my place. Washer, dryer, fridge and freezer are in the same room for space reasons. I have set up my workshop there.
It sits on a countertop (which by now) is almost 100% level. I used a spirit level to check exactly if the printer and especially the print bed is level as well. It should not get any vibrations from the other devices. A few days after washing, I do not print anything until the humidity in the room is back to normal.
I use a hygrometer to measure this in the room and in my storage box. The humidity in the box is 10% and in the storage room between 30 and 40%.
I have calibrated the bed several times (once a week) and also set the Z offset. Level tests run cleanly and the first layer is also very stable.
The wheels on the printer are set so that I can still spin them while stationary. The bed and print head do not wobble.
The first few weeks, I left the material on the printer or put it back in the airtight bags. Then I noticed "stringing" and dryed the material in the oven for several hours at about 45°C. It was gone after that.
I like the sustainable approach with the PolyTerra PLA and especially in combination with my solar system. Do you have any idea where the problems with the holes in the prints come from?
Is it the resistance of the cardboard rolls? Does the cardboard dust keep clogging my nozzles? Or is it the material itself?
I now want to start doing larger prints that take longer than 4 hours and it would be annoying to have to dispose of them because of the look. I am attaching some photos and my checklist here:
  • -Cura settings checked (Nozzletemperature: 210°C, Print Bed: 60/50°C)
  • -Firmware up to date
  • -Filament dried
  • -Filament sits on the printer (1KG spool) and goes through the sensor
  • -Extruder cleaned
  • -0.04mm brass nozzles replaced (sits flush with PFTE tube)
  • -Bed, Z-Offset calibrated
  • -Layer test and temptower printed (at 210°C the Font was the most beautiful).
PS: How is the spring set in your extruder?

https://preview.redd.it/u965ir0l904b1.jpg?width=2044&format=pjpg&auto=webp&s=465cb21d4ba812e7d3d33fa93e8ae5beae70146c
https://preview.redd.it/o7rtdq3l904b1.jpg?width=1369&format=pjpg&auto=webp&s=713cf7686eecfde08241ea943342492604120fd8
https://preview.redd.it/hw15f12l904b1.jpg?width=1505&format=pjpg&auto=webp&s=03e44238fce5848e01cc245706774e972a0b1024
https://preview.redd.it/o0dnse1l904b1.jpg?width=1324&format=pjpg&auto=webp&s=c6fb73c025dae1d95c26ccbd1c5004477518c0cd

submitted by B0R0T3S to ElegooNeptune3 [link] [comments]


2023.06.04 04:07 Toronto_explorer Apple watch Band, DIY help Request

Hi Reddit,
My friend gave me his old apple watch band for a 49mm watch but I have the smaller size apple watch 41mm. I was wondering If I could some how file down the titanium edges to make it fit my watch?
This is what it looks like when attached. Photo
As you can see the edges are sticking out. I think it would look great if made flush with the body. What simple cheap tools could I use to file it down and make look not to obvious that it was filed down?
Any help would be great. I think I would be the first person to do this lol? Thanks!
submitted by Toronto_explorer to DIY_tech [link] [comments]


2023.06.04 04:02 aaaaa143222 The US overseas Chinese Democracy movement's scandals part 1

Note: and other people in the same category as them

Wang Dan accused of sexual harassment by two people

Lee Yuan-chun accuses Wang Dan of sexual harassmentAccording to Radio Free Asia, on June 2nd, 2023, a man named Lee Yuan-chun (李元钧), accused Wang Dan of sexual harassment on Facebook. According to Lee Yuan-chun, in 2014 in Flushing, Wang Dan kissed him, attempted to rape him, and later continued to say sexual things. On Facebook, Wang Dan wrote that this did not happen. Li Yuan-chun told Radio Free Asia that he has some evidence related to the allegation.Reports: China Times SanlihRadio France International reported about this, but the article was deleted.**Xu Haoqian accused Wang Dan of sexual harassment (note: this name was transliterated from Chinese to pinyin)**Later, according to multiple news media, a Master of Taiwan's Tsinghua University also accused Wang Dan of sexual harassment.Reports: Apple Daily China Press United Daily NewsFurther reports: HK01 CTS

Zeng Dajun was rumored to be a CCP agent

In 2011, the China Social Democracy Party had a lot of internal conflicts involving Liu Guokai, Lu Yi, Liu Yinquan, Xiaopingtou, and others. Some members of the China Social Democracy Party were accused of being agents or doing bad things.In 2016, Bowen Press reported that Zeng Dajun, the chairman of the China Social Democracy Party was a CCP agent who infiltrated the overseas Democracy Movement and who had caused the arrest of many people in China, such as the China Social Democracy Party member Wang Xiaoning (王小宁). Zeng Dajun joined the China Social Democracy Party in 2000 and was elected to be its chairman in 2013.https://bowenpress.com/news/bowen_54262.html

Guo Baosheng convicted of fraud and defamation

On December 23rd 2019, the jury verdict ordered that Guo Baosheng pays a total of $24,000 (in defamation and fraud charges). WENGUI GUO is the plaintiff and BAOSHENG GUO is the defendant. The court is the United States District Court for the Eastern District of Virginia.To verify this information, you can use the case number , which is 1:18-cv-01064-TSE-IDD.

Chen Yangchao and Zeng Jieming had a conflict on a forum of the Democracy Movement

Chen Yangchao is the author of "On Privilege" and a participant of the "Democracy Wall" movement. Zeng Jieming is an exiled Chinese who participated in various dissident publications.In May, Chen Yangchao suggested that Zeng Jieming was a CCP spy on The Independent Review.Below is the continuation of the online conflict translated from Chinese to English.On May 18th, on the Independent Review forum of the Democracy Movement, Chen Yangchao wrote another post criticizing Zeng Jieming. In this post, Chen Yangchao called Zeng Jieming a "suspected communist agent", a "Little Pink", and a "gangster" ("共特嫌疑人小粉红混混"), and accused Zeng Jieming of supporting Russia against Ukraine.Zeng Jieming: "[...] What pro-democracy activist are you now? Since 2008, after you fought with Wu Fan to be the 'President of the Transitional Government of China', ended in failure and shame, except flattering the tyrannical dictators, writing letters to persuade Jiang Zemin, Hu Jintao, and Xi Jinping [note: Zeng Jieming used the nicknames 僵贼泯, 胡紧套 and 习正恩], proclaiming the emperor to 'create peace for all ages', what have you done? Is flattering and persuading tyrannical dictators the 'democracy movement' according to you? [...]"Chen Yangchao: "You immoral, corrupt thing that reverses black and white, didn't you see my series of long essays against the CCP? [...]" Chen Yangchao also attached a long article about the Christianity and Chinese politics.Zeng Jieming: "In October 2011, you and Liu Guokai (刘国凯) visited my residence by chance and were warmly received by my partner and me. Later, Liu Guokai reluctantly left first, but the next day, you left angrily. For a long time, I didn't know why and thought that my hospitality wasn't good. Later, I finally understood: when taking the group photo (my wife took the photo), I didn't let you 'saint' stand in the middle, but let Liu Guokai stand in the middle. [...]"Chen Yangchao: "In October 2011, to reconcile the conflict between Liu Guokai and Liu Yinquan (刘因全), before flying from Los Angeles to New York, I made an appointment with Liu Guokai to meet and exchange ideas at your home. I went to see your family who just immigrated to the United States.After that, you propose to take a group photo. Guokai was a person who personally experienced the Democracy Wall movement and the shocking influence of 'On Privilege' at that time. Therefore, he insisted that I stand between you and him. Because I thought that you just arrived in the United States and needed Liu Guokai's help, and should help strengthen your relationship with him, I insisted that he stand between me and you. So we pushed each other several times. You said: 'It's better to ask Chairman Liu to stand in the middle', and I also said: 'Guokai is welcome to be in the middle.' Only then did the mutual pushing between me and Guokai stop. After the group photo, I took a photo while holding your son who was born after I took a long-distance taxi in Bangkok to visit your family in Thailand. Where is that 'fact' that you fabricated?[...]Not to mention, Mr. Liu Guokai your wife are witnesses. If your wife is as heartless as you are, responding to kindness with hate, then the wrath and severe punishment of God will come upon your family![...]It's a pity that you didn't send me any of the photos you took this time. Otherwise, I can post it now to let everyone see if I am narrow-minded and "angry and resentful (yet)" as you said![...]At your house this time, you insisted that when I went to live with Liu Yinquan's family in Los Angeles, I was sick because Liu Yinquan drugged me; that the computer had problems because Liu Yinquan damaged it! You insisted that it was this scoundrel spy Liu Yinquan who did it! You asked me to publicly reveal this matter, and expose Liu Yinquan's true face! I have repeatedly told you that you can't do this arbitrarily. I have repeatedly advised you to improve your relationship with Liu Yinquan as much as possible... [...]"Zeng Jieming: "Only looking at your words 'he died well' when you heard the news of Peng Ming (彭明)'s death, Peng Ming's spirit in heaven will not forgive you! [...]"Chen Yangchao: "[...] I have some criticisms of Peng Ming's seriously anti-democratic dictatorial gangster tactics that are more vicious than those of the Communist dictators. [...]In the article '答友人谈彭明的典型意义和代表性兼及其它', I have already quoted a series of anti-democratic and anti-society words written by Peng Ming in his 'Democracy Project' and the 'legal clauses' tailor-made for Peng Ming from the '中国联邦临时政府约法(草案)' personally revised by Peng Ming, which solidly proves that Peng Ming — in essence, he is a typical evil breed hatched in China's century-old troubled times. [...]"Other commentsSome people commented on their conflict on The Independent Review."Guo Qinghai" (郭庆海): "I support old Chen to relentlessly pursue and fiercely attack, heheh""Leg pain" (小腿疼): "When mental illness occurs, you should increase your medication."

Shen Tong accused of adultery and beating his wife

Shen Tong was a leader of the '89 protest movement. In recent years, his level of participation in the overseas Democracy Movement diminished.In 2005, Shen Tong was accused of adultery in Taiwan with a woman surnamed Lai.TVBS: https://news.tvbs.com.tw/local/417997In 2017, Shen Tong was accused of beating his wife (Ms. Lai) in the U.S and was indicted on one count of second-degree assault.New York Post: https://nypost.com/2017/10/04/millionaire-anti-violence-activist-busted-for-beating-his-wife/

Wu'erkaixi's controversy in Taiwan

In June 2005, Wu'erkaixi was photographed "picking up girls" at a nightclub in Taipei.TVBS: https://news.tvbs.com.tw/life/440370In 2019, Wu'erkaixi was arrested in Taiwan for driving a motorcycle while drunk. The level of alcohol contained in his body surpassed the allowed limit.China Times: https://web.archive.org/web/20190515050022/https://www.chinatimes.com/amp/realtimenews/20190331001111-260402

Wang Dan allegedly received 400,000$ from the Taiwanese government

In April 2011, multiple news media reported that testified in court that he had received two grants from the Chen Shui-bian administration totaling 400 000 USD and that the source of the money was not clear.
China Times: https://www.chinatimes.com/amp/newspapers/20110416002085-260107
Liberty Times: https://news.ltn.com.tw/news/politics/pape484870
Wang Dan responded that the reports of him having received 400 000 USD are false.
North America Online/BBC: http://naol.ca/news/world/2011/04/16-1.htm
Later, Wang Dan said "The report [of the Central News Agency] is misleading. What we accepted is the Republic of China's government's funding of the overseas Democracy Movement. Well, if it is said to be Chen Shui-bian's personal support, then I think this is not in line with the facts. [...] What he represents is not himself, but the government of the Republic of China."Deutsche Welle: https://www.dw.com/zh/%E7%8E%8B%E4%B8%B9%E5%8F%B0%E6%B9%BE%E8%B5%84%E5%8A%A9%E5%B9%B6%E9%9D%9E%E9%99%88%E6%B0%B4%E6%89%81%E7%9A%84%E4%B8%AA%E4%BA%BA%E6%94%AF%E6%8C%81/a-14997215
Cao Changqing pointed out that Wang Dan's response to this allegation made no sense.ChinaAid: https://www.chinaaid.net/2014/09/blog-post_38.html

Chen Shui-bian disclosed in 2022 that he paid Wang Dan

Chen Shui-bian paid 6.6 million NTD to Wang DanIn April 2022, Chen Shui-bian revealed 21 cases of "Guowu Jiyao Fei", including two payments to Wang Dan, totaling 6.6 million NTD.China TimesMing PaoChen Shui-bian disclosed that Wang Dan was paid 200,000 USD after meeting himWang Dan came to the Presidential Palace to talk to Chen Shui-bian. Chen Shui-bian also allocated 200,000 US dollars to be paid in two years to Wang Dan. However, Chen Shui-bian said that U.S. law stipulates that it is not allowed to accept foreign government funding. In order to help Wang Dan, the government used many people. Wang Dan admitted it in a secret court.SanlihThe Storm Media

Wang Dan was accused of pretending to be ill to receive donations

In 2014, Wang Dan claimed to have a brain tumor and asked for donations. Feng Congde and Tang Baiqiao accused him of deceiving people.China Times Liberty Times

Innapropriate photos of Sheng Xue

Sheng Xue is the leader of the Federation for a Democratic China (FDC). Many other political dissidents, such as Fei Liangyong, accuse her of behaving badly.https://www.nytimes.com/2019/04/01/world/canada/china-dissident-harassment-sheng-xue.htmlThese are alleged nude and innapropriate photos of Sheng Xue. She denied it.https://web.archive.org/web/20230228122715/http://45.35.61.42/hero/201608/xiaopingtouyehua/2_1.shtmlhttps://web.archive.org/web/20230228122715/http://45.35.61.42/hero/201608/xiaopingtouyehua/2_1.shtmlhttps://web.archive.org/web/20230228123614/https://club.6parkbbs.com/bolun/index.php?app=forum&act=threadview&tid=15257084

A spy and an murder in Flushing

Wang Juntao is the leader of an organization of the "China Democracy Party" in Flushing. A Beijing petitioner named Zhang Xiaoning killed the lawyer Jim Li. Zhang Xiaoning was a participant of the protests of Wang Juntao's group. Wang Shujun, someone who was close to Wang Juntao, was found to be a spy of China.https://nymag.com/intelligencearticle/wang-juntao-exile-chinese-communist-party-nyc.html

Liu Gang's wife was accused of being a Chinese spy

Liu Gang is the former leader of the student self-government federation during the '89 protest movement. In 2011, he accused accused his wife of being a spy of China.

Guo Wengui

Guo Wengui is a rich businessman who escaped from China. In 2017, he was supported of many people such as the dissident former official Bao Tong and the soccer player Hao Haidong.In 2017, he was accused of sex assault.He got into conflict with many political dissidents, including Bob Fu, Tang Baiqiao and Guo Baosheng.

Chai Ling accused Yuan Zhiming of raping her

Chai Ling was an important person during the '89 protest movement. However, she is not very active now.In 2015, she accused the dissident pastor Yuan Zhiming of raping her in 1990. In 2016, the christian group "GRACE" published their final report on the allegations.

Peng Ming

In October 1998, Peng Ming's organizations, the China Development Union, was declared illegal by the government and closed.In 2005, Peng Ming was in China sentenced for terrorism.Peng Ming intended to use violent methods to overthrow the Chinese government, such as assassinations and poisoning the Miyun reservoir in Beijing.Radio Free Asia, Yi Gai Creaders (万维)

Wei Jingsheng was accused of rape

Wei Jingsheng is the "father of the Democracy Movement". He wrote "the fifth modernization", calling for democracy.In 2019, Liu Huaizhao filed a complaint alleging that Wei Jingsheng had a child with her after a sexual intercourse but did not give financial support as promised. Wei Jingsheng claimed that Liu Huaizhao was sent by the CCP to disrupt his work.

Ni Yuxian

Ni Yuxian is the founder of a "Party for Freedom and Democracy in China".
In 2006, because of a conflict with Xie Wanjun (leader of a China Democracy Party), Liu Dongxing invited Ni Yuxian to cooperate. Because of this, Ni Yuxian got into conflict with other political dissidents.
In 2007, after Liu Dongxing and Ni Yuxian expelled each other from an organization named "China Democracy Party", Ni Yuxian reported Liu Dongxing to the 109th branch of the municipal police in Flushing, accusing Liu Dongxing of embezzling party fees and other crimes. On October 27th, the police arrested Liu Dongxing at the "party central office".
According to Ni Yuxian, Liu Dongxing demanded that anyone who joins the China Democracy Party must pay 500 US dollars plus 10 US dollars each month and an activity fee for each activity. According to Ni Yuxian, Liu Dongxing often asked for donations without receipts, and forced people to buy "democracy stocks" that he printed himself and the "US Headquarters of the China Democracy Party" ("中国民主党美国总部") of Liu Dongxing participated in political asylum business.
Ming Pao
submitted by aaaaa143222 to China [link] [comments]


2023.06.04 03:40 lafreniereluc Sea-Doo Steering Pad Mount(s) - 2023 GTX

Photos: https://imgur.com/a/GQAlDJF
I just purchased a Sea-Doo GTX 230. I was trying to find ways to mount my phone to the handlebars, ideally in the middle. My goal was to have a low profile, VERY solid mount. I considered and tried a few different things, but these two were my favorite designs.
I realized the sticky mount (last two pictures) would work but the base was simply too large for the area. But I figured I'd show people in case they have a use case. You could also trim the base to make it smaller via Dremel or other. To make, I bought one of those dash suction cup bases that comes with the super strong 3M VHB tape (thicker than the phone ones, so they REALLY stick to textured surfaces and such). I took the Universal Bar Mount, removed the four screws in the back. Then aligned the the holes on the base plate and drilled them precisely. Then, re-purposed the exact same screws. The VHB tape is thick enough that the heads of the screws are actually flush with the tape. Works quite well!
The other idea took a bit more work, but it worked AMAZINGLY well for this purpose. I purchased heavy duty bungee straps designed for furniture webbing. It's really strong stuff. I got a matching set of buckles and one of those black metal plates that people stick on their phones to have them attach to those (meh) magnet phone mounts.
I first aligned and drilled four holes precisely on the black metal plate. Then placed the plate on the bungee strap and melted holes using a soldering iron. Then I sandwiched the bungee strap between the Peak Design SlimLink and the black metal plate. I could have used the same screws, but they are bevelled and I didn't want to scratch my Sea-Doo. So I used identical sized screws with round tops instead which I happen to have (M3 is the size).
I would say I sewed one end (but in reality, my wife is the expert here), then tested the fit, adjusted the other end until I had to stretch it quite tight to get it to click, and marked it. My wife sewed the other end at that spot.
Finally, placed a piece of Gorilla tape just to make sure no sharp edges stick out against the Sea-Doo foam pad.
Voià! A very secure, custom made mount that holds incredibly well. I went for a SUPER rough ride today actually in extremely choppy conditions. The phone was rock solid, didn't wiggle or anything. I'm extremely pleased and there's no holes or glue on the Sea-Doo. Which is nice considering it's brand new.
submitted by lafreniereluc to peakdesign [link] [comments]


2023.06.04 03:01 Cri_Text Come through!!!

Come through!!! submitted by Cri_Text to CriText [link] [comments]


2023.06.03 23:24 throwRAnaivegirl HOW TO IDENTIFY THE RASH BEFORE IT BECOMES FATAL

HOW TO IDENTIFY THE RASH BEFORE IT BECOMES FATAL
Hello all!
First, I’m on mobile so sorry for the formatting. Second, a lot of you seemed interested in my experience with the SJS rash, and how I managed to catch it early. I wanted to finish my course of steroids before making this just to make sure I was in the clear, so that’s why it took a while for me to start writing this. Thank you all for the well wishes! Now, let’s get into it. I’m essentially going to give a calendar view of what happened, along with some photos to explain the progression of my symptoms.
May 5th - Started on 25mg of lamotrigine
May 12th - Went up to 50mg of lamotrigine
May 13th - Passed out, my first adverse side effect of lamotrigine
May 17th - Woke up with an incredibly swollen gland on the back of my neck(photo 1) as well as a small white spot on my tonsils. Went to urgent care due to pain when swallowing, tested negative for strep throat.
May 19th - went up to 75mg of lamotrigine
May 17th-24th - I had horrible body aches and pains, trouble swallowing, and was sleeping 18+ hours a day. Slowly, every lymph node in my neck became enlarged and painful. (Photo 2)
May 24 - woke up with a low grade fever and abdominal pain, and decided to go to urgent care again. Tested negative for strep and mono. Urgent care sent me to the emergency room to get STAT bloodwork done because the abdominal pain was indicative of spleen and kidney issues. At the emergency room I tested negative for Covid, influenza, and RSV, and my blood work came back completely normal, which the doctor chalked up to my body poorly fighting off a viral infection. However, he WAS concerned about an adverse reaction to lamotrigine, and offered to do a skin inspection. I was forced to decline due to my dad thinking I was being dramatic. I was sent home with instructions to just push fluids and take fever reducers.
May 26 - fever got up to 103°, and the rash started. Photo 3 was the rash at 4 PM, photo 4 was the rash at 5 PM. We assumed it was the virus leaving my system.
May 27th - The rash doubled in size overnight; it had gone from small specks on my chest to being on every part of my body. EVEN IF YOU ARE NOT ON LAMOTRIGINE, GO TO A DOCTOR IF THIS HAPPENS. Photo 5 was at 6 AM, photo 6 was at 7 AM. I took a shower at 9 AM to see if maybe it was just dermatitis, and it didn’t get better. My mom drove me to the hospital and I was admitted. Photo 7 was what it looked like by 10 AM. They sent photos of me to the CDC, and kept me for observation. Photo 8 was what it looked like by 5 PM.
May 28th - The rash had gotten significantly worse. Photo 9 was what I looked like at 11 that morning. They decided to keep me another day for observation, and started steroids. Photo 10 is my chest that day as well.
May 29th - Steroids had significantly reduced the redness and rise of the rash (photo 11), so I was discharged with a course of steroids to take. I have been home since!
The rash slowly went away and I’m looking (almost) normal again! Important details:
  • While in the hospital, their main course of action was flushing the lamotrigine out of my system with IV fluids, and then using steroids to try to kickstart my immune response so that my body would take care of the toxin before the rash became submucosal. This is why I didn’t have blisters on my eyes, skin, or lips — we essentially got ahead of it, combined with the fact that I was on such a low dose.
  • Your main warning sign that you have some sort of lamotrigine toxicity is if you are super sick, but no one around you is sick or getting sick. I was diagnosed with allergies the first time I was at urgent care.
  • I am allergic to Zithromax and lupus runs in my family, this is likely why I had an adverse reaction. I shouldn’t have been put on lamotrigine because of this - an oversight by my psychiatrist and I.
  • Don’t play around with lamotrigine. Talk to your provider in depth when you start it, and stop it as soon as anything gets strange.
I’ll answer any questions that y’all have. Thanks for reading!
submitted by throwRAnaivegirl to Lamotrigine [link] [comments]


2023.06.03 22:50 CLICCO11 [WTS] Modlite PL350 & Mischief Machine Omega XL Grip for P365 Series

Timestamp: https://imgur.com/a/vYNUG28
Pricing: 1. Modlite PL350 weapon light with Modite battery. Excellent condition - $265 shipped Edit: Would also be interested in working out a trade deal for a Surefire x300 turbo (not interested in older, non-turbo x300 models)
  1. Mischief Machine Omega XL grip (non-manual safety version) for P365 series (this is the version where the dust cover will be flush with a standard P365 slide). Black with black/gray grips. Comes with factory magazine release. Very good condition with tiny salt (see photos) - $300 shipped
PayPal F&F is preferred - NO NOTES. PayPal G&S is fine with buyer covering the fees - NO NOTES.
submitted by CLICCO11 to GunAccessoriesForSale [link] [comments]


2023.06.03 22:10 spinninginit Attaching things to walls of a steel shed?

Just had a steel shed built in the back yard. I'd like to start adding some pegboard and shelving to the walls.
I'm an absolute novice and I've had a difficult time finding information on how to go about this that isn't just somebody using whatever assortment of material and fasteners he had lying around.
Is there a standard procedure for affxing things to the walls of this kind of structure? Online resource with recommended size of screw, type of bracket, etc.?
I'd prefer to follow the best practice rather that just bolt something to the wall and realize it was a terrible idea in 6 months.
The framing members in the photo are 3in deep.
My best guess so far was to use L-brackets / corner-brackets of some kind to mount pieces of dimensional lumber flush with the front faces of the framing members. I could then drill whatever I wanted into the wood.
This is a shot of the wall and my proposed solution.
https://imgur.com/a/FOyXKiB
I believe I need hex-head self-drilling screws for attaching to the metal members. Is there a recommended screw size? #8, #10? The framing members are hollow inside and look to be maybe 1/8 of an inch thick, so would 1/2in length work?
Do I need a bracket with flat holes on one side for the metal screws and conical holes for the wood screws on the other? I haven't been able to find anything like this.
submitted by spinninginit to DIY [link] [comments]


2023.06.03 21:19 mikechenwriter Delayed start to fill valve after flush

Delayed start to fill valve after flush
Last night I noticed that our toilet had a slight delay to the fill valve's start following a flush, just a few seconds. This morning, it happened two more times. The first time was just a few seconds and the second time took about a minute. While I was waiting for that last time, I jiggled the arm to see if it would trigger anything, but it remained loose. It just started going on its own about a minute in.
In the next test flush, the fill valve started immediately. In all of these instances, the actual fill flow was normal and filled up in its expected time.
I've attached a photo so you can see it's a pretty standard valve. It was replaced about 5 years ago, so it's old but not ancient. Is this something I should just keep an eye on or is it a sign of needing maintenance?
https://preview.redd.it/xmxyzc1csu3b1.jpg?width=1470&format=pjpg&auto=webp&s=f5b29e038dd54841776c0d0e3b513a45f3a721e4
submitted by mikechenwriter to Plumbing [link] [comments]


2023.06.03 17:39 DungeonsNDrams [WTS] Haley D3CRM RG, Safariland/Trex Arms G19 Holsters, Arisaka 1860 Body, Surefire Z68, Arisaka 3 Slot Picatinny Adapter, Magpul Sling QD and Hacked Mlok Handstop Kit, 3M Kids Ear Pro

Timestamp: https://imgur.com/a/TjG1gC7
Looking to split with some of my extra stuff. All prices OBO/Shipped w/ PP F&F. Open to bundle deals!
Haley Strategic D3CRM (RG): $160 SOLD
Safariland 6390RDS G19 w/ X300/TLR1: $100 SOLD
Safariland 7TS 7390RDS G19 with TLR7: $110
Trex Arms Sidecar 2.0 G19 w/TLR7: $100
Modlite 18650 Body: $70
Arisaka Low Profile 3 Slot Mlok to picatinny adapter: $20 SOLD
Magpul Sling QD: $15
Magpul Mlok Handstop Kit: $12
3M Kids Ear Pro: $20
Let me know if you have questions or want more photos!
submitted by DungeonsNDrams to GunAccessoriesForSale [link] [comments]


2023.06.03 07:45 Ok-Appeal9052 Hard days

I (22M) have been dealing with Rosacea ever since being a teenager and just ignored it for most of my life because it was easier. The past 2 years I have been paying attention to it, trying to reduce the redness. I have type 1 and I feel like I have tried everything.
I tried doxy for months on end, soolantra and I have had 6 vBeams (noticed an improvement with that). This morning I had a breakout where my skin felt like it was on fire and I just broke down in tears.
I felt like no one understood what it’s like to be the reddest in the room, to hate looking at myself in photos, to wait for people to go why are you so red. It’s horrible! Then I found this page and was relieved to know other people go through this too.
I am looking for a skincare routine (I’ve tried a few) and I just ordered a Vanicream cleanser and a Cetaphil moisturiser to see how I’ll go. I use an ASAP sunscreen that I find doesn’t flush me too badly.
I’ve never really focussed on a diet either but what are your successes with changing diets and your rosacea?
Thanks and I’d love to hear your input guys! :)
submitted by Ok-Appeal9052 to Rosacea [link] [comments]


2023.06.03 07:43 jsm1 Red raised marks on calf that look like petechiae, should I be concerned?

Hi there - 29M here. I noticed raised red marks on my calf, that look quite similar to petechiae. They are raised rather than flat, do not blanch when pressed, and are not itchy. I’ve added a photo as a comment.
My understanding is that petechiae are flush with the skin and are not typically raised. How concerned should I be?
My other diagnoses are mild Ulcerative Coltis, Psoriasis, and a fair number of environmental allergies.
submitted by jsm1 to AskDocs [link] [comments]


2023.06.03 04:39 InitiativeSoggy8505 can someone tell me if this could’ve been an ectopic pregnancy or just a miscarriage?

so i’m a 20 yo woman. when i was 19 and on nexplanon, i decided to take a random pregnancy test, and it came back with the lightest double line i’ve ever seen. everyone i asked told me i was crazy and it wasn’t there, so i believed them and just forgot about it. about a month and a half/two ish months later, i experienced extreme cramping one night that was leaving me frozen in place. i would’ve gone to urgent care or something had i not been obligated to perform in a concert, it was almost debilitating. the next morning i sat in the toilet and a big ball of fleshy stuff fell out. i freaked out and flushed it, and assumed it was just a miscarriage. about a year later, i learned what a decidual cast is and the symptoms, and it made a lot of sense. nexplanon is associated with a few rare pregnancies, often ectopic. and ectopic pregnancies are associated with a few rare cases of decidual casts. i edited the photo i took of the pregnancy test i thought was positive, and after bringing out the shadows it is blatantly positive. so was this a miscarriage? an ectopic pregnancy that lead to a decidual cast? i’m just so confused because a week or so after this happening i had a trans vaginal ultrasound and they found nothing abnormal. i feel like i’m crazy but it was not a normal experience.
submitted by InitiativeSoggy8505 to ectopicpregnancy [link] [comments]


2023.06.03 02:50 sveltopus That'll buff right out...

That'll buff right out...
This house was built in 1912 and I bought it in 2020. Every single project so far has been a can of worms, and this one is no different.
I took a shower during my lunch break today and as I was lounging around in my robe, I smelled sewer gas. Couldn't find the source of it at any of my drains, there was just pockets of this really strong odor throughout my house. So, I called a plumber.
He assumed at first that it was due to my toilet rocking, so he said that he's probably need to replace the phalange. I pointed out this weird access hole in my laundry room that I've been suspicious of since I moved in and lo and behold... this photo. Basically every time I've flushed or done anything involving water upstairs over the past 3 years, it came out through this crack.
Got quoted $5.5k to replace my entire sewer stack (and the toilet's rotted out phalange) on Monday. No more showers until then. I gutted a basement bathroom a few years ago and had the plumber reinstall the toilet in that room so I can still live in my house over the weekend.
My advice? Go with your gut and ask about the weird access holes or other things you're suspicious of - even if the contractors initially brush it off or you think it might be nothing. I would've found this massive crack so much sooner if I'd just pushed someone to take a closer look a year or two ago. It would've been just expensive back then, but it also would've meant less sewage splashing around inside my laundry room walls over the last few years :(
submitted by sveltopus to centuryhomes [link] [comments]


2023.06.03 01:02 JC273699 Cosmic Consciousness

Right now the Sun is having more and more profound epigenetic effects on the human genome. This is changing the expression of genes & spearheading the Ascension of consciousness taking place globally. This is the return of the Light talked about by ancients. Consciousness/Ether comes from the Sun.
Isotopes are atoms of the same element, that have different numbers of neutrons. A typical Carbon atom has 6 protons, 6 neutrons, and 6 electrons -- 666. This is the "heavy" Carbon that is binding us here physically and mentally.
Radiation from the Sun is both stimulating RNA & mitochondria to express genes & process energy differently, and also mutating Carbon atoms comprising living beings from Carbon-12 to Carbon 7, displacing 5 of the neutrons in the nucleus of the Carbon atoms, rendering the Light-like Carbon-7. this dissipation of neutrons is the classic "halo" or "Aura" of Light that has been reported around great Sages across Time, something formerly only available with decades of dedication. this is why things are getting a little wild here on Earth.
You can accelerate this process by eating real foods ripe with the Cosmic Carbon that is restructuring the DNA. Fast from the heavy foods & fake ingredients...
restructure the body & DNA with fruits; vegetables; mushrooms like cordyceps, lions mane, reishi, oysters, etc; chlorella & spirulina algae; shilajit; and many more mushrooms & herbs that I can discuss...
but ESPECIALLY Euchema cottonii Sea moss.
On top of having nearly all of the trace minerals & elements the body needs, as well as many vitamins & amino acids, the sea moss is mostly comprised of a compound known as carrageenan, which affords it its chain-like structure molecularly, and it's gel like properties on the macro scale.
Carrageenan makes the moss into a gelatinous matrix that protects the important nutrients & phytocompounds from reacting with things in the body. It's sulphur backbone flushes it with electrons ready to be dumped into the system to neutralize free radicals.
The moss goes through like a sponge, absorbing heavy metals & exchanging them with its stockpile of trace minerals intentionally missing from the modern diet.
Modern medicine is mimicking its ability to protect sensitive compounds that need to be delivered to cells in-tact.
Carrageenan has 3 isomers that are all present in the sea moss... but the most important is Lambda carrageenan... The Light.... this isomer stores Sunlight -- which is Etheric Consciousness -- in the bonds of its carbon chains. You are literally ingesting Cosmic Consciousness.
I work with a PhD in plant & soil sciences who is also one of those Old Forest Souls they warned you about... one of those ones ripped straight from the Ether itself...
after eating the moss with him for a year now, I know that it is here to combat what is happening on Earth. It energizes you. It re-mineralizes you. It offers immunity, and nourishes the hair, skin, & nails with its collagen content.
Please eat these things... but source them properly & make sure you clean the moss in an acidic wash if you get it raw from the ocean.
The other thing we must do to reset the DNA is spend time in Nature. The forests are like essential oil factories. They're constantly pumping out tons of the same terpenes in cannabis that relax you. The forests are also symphonies of the organic Etheric spiraling that we are trying to mimic with electroculture. When you spend time there, as your cells divide, they are coming into fruition with this as the background music.
Instead of the Artifical lights & sounds skewering the Ether, you are regenerating yourself in a place where the Cosmic spin isn't being interrupted... that Fibonacci spiral, that signature of Source Consciousness...
people have known for thousands of years that grounding the skin to the surface of the Earth benefits mood, cognition, and general wellness. We have been insulated from the charge of the Earth with rubber and plastic. The electrons from the Earth will flow through you like a circuit to neutralize the charge on free radicals before they can oxidize your cells & DNA.
the dyes, preservatives, stabilizers, and other heavy metal directly oxidize the DNA & degrade the telomeres, akin to the cap on a shoelace beginning to deteriorate, allowing the string to unravel. The DNA is vibrating & negatively charged. It has an affinity for all of the positively charged transition metals they pump into the food & air. We need things to clear this gunk out. Chlorella/spirulina tablets. Activated charcoal. And euchema cottonii.
Go out into the Sun... Allow the positive electricity from our Star to flow down through the Crown & through the photo receptors in the Pineal Gland..
Walk out into the Forest, wearing nothing on your feet... Allow the negative Magnetism of the Earth to course through your Roots...
This creates the Constructive Interference with the natural spiraling of the Ether, that base frequency that heals all...
This is a time when humanity needs to seize the reins in this epigenetic struggle
The people running the show are incredibly smart. theyve reverse engineered reality right down to the physics. Which is why you'll (rightfully) find a lot of intelligent skeptics throughout groups like these: The subtle energies have been completely slandered and hidden.
Consciousness comes from the Sun. The Sun is increasing in intensity more and more, spurring the mass awakening that is drawing people back to nature & a sense of altruism for Earth & humanity. This is what people have waited for for so long. The Sun is going to give a little Celestial Sneeze that will vanquish the Evil from this planet. A Conscious Plasma Event that will restore humanity to its Cosmic status. This is why things have been getting more and more intense on Earth.
This is a time when the collective consciousness is remembering vast amounts of forgotten & hidden knowledge... the End of one cycle...
And the Beginning of Another
submitted by JC273699 to starseeds [link] [comments]


2023.06.03 01:02 JC273699 Cosmic Consciousness

Right now the Sun is having more and more profound epigenetic effects on the human genome. This is changing the expression of genes & spearheading the Ascension of consciousness taking place globally. This is the return of the Light talked about by ancients. Consciousness/Ether comes from the Sun.
Isotopes are atoms of the same element, that have different numbers of neutrons. A typical Carbon atom has 6 protons, 6 neutrons, and 6 electrons -- 666. This is the "heavy" Carbon that is binding us here physically and mentally.
Radiation from the Sun is both stimulating RNA & mitochondria to express genes & process energy differently, and also mutating Carbon atoms comprising living beings from Carbon-12 to Carbon 7, displacing 5 of the neutrons in the nucleus of the Carbon atoms, rendering the Light-like Carbon-7. this dissipation of neutrons is the classic "halo" or "Aura" of Light that has been reported around great Sages across Time, something formerly only available with decades of dedication. this is why things are getting a little wild here on Earth.
You can accelerate this process by eating real foods ripe with the Cosmic Carbon that is restructuring the DNA. Fast from the heavy foods & fake ingredients...
restructure the body & DNA with fruits; vegetables; mushrooms like cordyceps, lions mane, reishi, oysters, etc; chlorella & spirulina algae; shilajit; and many more mushrooms & herbs that I can discuss...
but ESPECIALLY Euchema cottonii Sea moss.
On top of having nearly all of the trace minerals & elements the body needs, as well as many vitamins & amino acids, the sea moss is mostly comprised of a compound known as carrageenan, which affords it its chain-like structure molecularly, and it's gel like properties on the macro scale.
Carrageenan makes the moss into a gelatinous matrix that protects the important nutrients & phytocompounds from reacting with things in the body. It's sulphur backbone flushes it with electrons ready to be dumped into the system to neutralize free radicals.
The moss goes through like a sponge, absorbing heavy metals & exchanging them with its stockpile of trace minerals intentionally missing from the modern diet.
Modern medicine is mimicking its ability to protect sensitive compounds that need to be delivered to cells in-tact.
Carrageenan has 3 isomers that are all present in the sea moss... but the most important is Lambda carrageenan... The Light.... this isomer stores Sunlight -- which is Etheric Consciousness -- in the bonds of its carbon chains. You are literally ingesting Cosmic Consciousness.
I work with a PhD in plant & soil sciences who is also one of those Old Forest Souls they warned you about... one of those ones ripped straight from the Ether itself...
after eating the moss with him for a year now, I know that it is here to combat what is happening on Earth. It energizes you. It re-mineralizes you. It offers immunity, and nourishes the hair, skin, & nails with its collagen content.
Please eat these things... but source them properly & make sure you clean the moss in an acidic wash if you get it raw from the ocean.
The other thing we must do to reset the DNA is spend time in Nature. The forests are like essential oil factories. They're constantly pumping out tons of the same terpenes in cannabis that relax you. The forests are also symphonies of the organic Etheric spiraling that we are trying to mimic with electroculture. When you spend time there, as your cells divide, they are coming into fruition with this as the background music.
Instead of the Artifical lights & sounds skewering the Ether, you are regenerating yourself in a place where the Cosmic spin isn't being interrupted... that Fibonacci spiral, that signature of Source Consciousness...
people have known for thousands of years that grounding the skin to the surface of the Earth benefits mood, cognition, and general wellness. We have been insulated from the charge of the Earth with rubber and plastic. The electrons from the Earth will flow through you like a circuit to neutralize the charge on free radicals before they can oxidize your cells & DNA.
the dyes, preservatives, stabilizers, and other heavy metal directly oxidize the DNA & degrade the telomeres, akin to the cap on a shoelace beginning to deteriorate, allowing the string to unravel. The DNA is vibrating & negatively charged. It has an affinity for all of the positively charged transition metals they pump into the food & air. We need things to clear this gunk out. Chlorella/spirulina tablets. Activated charcoal. And euchema cottonii.
Go out into the Sun... Allow the positive electricity from our Star to flow down through the Crown & through the photo receptors in the Pineal Gland..
Walk out into the Forest, wearing nothing on your feet... Allow the negative Magnetism of the Earth to course through your Roots...
This creates the Constructive Interference with the natural spiraling of the Ether, that base frequency that heals all...
This is a time when humanity needs to seize the reins in this epigenetic struggle
The people running the show are incredibly smart. theyve reverse engineered reality right down to the physics. Which is why you'll (rightfully) find a lot of intelligent skeptics throughout groups like these: The subtle energies have been completely slandered and hidden.
Consciousness comes from the Sun. The Sun is increasing in intensity more and more, spurring the mass awakening that is drawing people back to nature & a sense of altruism for Earth & humanity. This is what people have waited for for so long. The Sun is going to give a little Celestial Sneeze that will vanquish the Evil from this planet. A Conscious Plasma Event that will restore humanity to its Cosmic status. This is why things have been getting more and more intense on Earth.
This is a time when the collective consciousness is remembering vast amounts of forgotten & hidden knowledge... the End of one cycle...
And the Beginning of Another
submitted by JC273699 to EsotericOccult [link] [comments]