Badger garbage disposal allen wrench size

Battery Drain

2023.06.07 02:38 onlywiseman Battery Drain

Got RG405M about 3 wks ago. It would drain the battery in 2 days despite it was kept off. Tried background activity off and android setting and wifi off. It helped little bit, but battery kept losing 1% of its power every 20-30min. So I emailed anbernic and they recommended the following
  1. Fully drain the battery by using it (I turned PS2 emulator on)
  2. Recharge fully.
  3. Do this twice
  4. Open the back with allen wrench (it's metric size)
  5. unplug and plug the battery from the device.
Now it's been 3.5hrs. Battery is still at 100%. I have no idea how this works, but it's working.
submitted by onlywiseman to ANBERNIC [link] [comments]

2023.06.06 08:51 ExcitingBrilliant177 Bioplastics Market Research Reports, Industry Size, Growth Opportunity, Regional Analysis to 2031

Bioplastics Market Research Reports, Industry Size, Growth Opportunity, Regional Analysis to 2031
Global Bioplastics Market Key Insights
During the forecast period of 2023-2035, the global bioplastics market is expected to reach an estimated value of ~USD 50 billion by 2035 by expanding at a CAGR of ~18%. The market further generated revenue of ~USD 12 billion in the year 2022. Major key factors propelling the growth of the bioplastics market worldwide are the growing waste generated by petroleum-based plastic, the rising production of bioplastics, and the government proactively boosting its usage.
Market Definition of Bioplastics
Bioplastics are a material made up of renewable biomass sources. It is a polymer that is commercially used for producing various products. The products which are used in making the bioplastics are straw, woodchips, corn starch, fats & oils, and others. Bioplastics are boon for reducing carbon gas emissions, as they have an efficiency of reducing CO2 emissions by around 30-70% in comparison to petroleum plastics. Other than renewable biomass sources, other elements such as insects, seaweeds, and mammals are also been studied to be a source for producing bioplastics.
Get a Sample PDF Brochure:
Global Bioplastics Market: Growth Drivers
The growth of the global bioplastics market can majorly be attributed to the growing petroleum plastic waste in the world. According to United Nations Environment Programme, 1 million plastic bottles are bought globally every minute, and up to five trillion plastic bags are used annually. Half of all plastic produced is intended for single-use applications, meaning it will only be used once before being discarded. Every year around 400 million tonnes of plastic waste is generated. On the other hand, the market growth can also be attributed to rising volumes of greenhouse gas due to the production of plastic. Researchers predict that the manufacture and combustion of plastic released more than 850 million tonnes of greenhouse gases into the sky globally in 2022. These emissions may reach 2.8 billion tonnes by 2050.
The global bioplastics market is also estimated to grow majorly on account of the following:
· Increasing plastic waste in the world
· Need to reduce greenhouse gas emission
· Government initiatives for using bioplastics
· Growing demand for bio-plastics
· Strict policies against the use of single-use plastics
Global Bioplastics Market: Restraining Factor
The application of bio-plastic is not as versatile as petroleum plastics. Moreover, the production cost of bioplastics is high and there are many substitutes available in the market which can be produced at a lower cost. Hence, these factors are expected to be the major hindrance to the growth of the global bioplastics market during the forecast period.
Know More About the Complete Study @
Global Bioplastics Market Segmentation
· By Product (Biodegradable, and Non-Biodegradable)
· By Application (Packaging, Automotive & Transportation, Textile, and Others)
The packaging segment, amongst all the other segments, is anticipated to garner the largest revenue by the end of 2035. The growth of the segment can be attributed to the growing use of plastic in food and beverage packaging followed by growing awareness of sustainable packaging. A whopping 36% of all plastics made are used in packaging, primarily in single-use items for food and drink containers that are disposed of in landfills. Furthermore, 60% of consumers worldwide consider sustainability to be an important purchasing factor. Moreover, around 54% of consumers under the age of 44 prefer sustainable packaging for the product they are buying and nearly 83% are ready to spend more if the product is wrapped in a sustainable packet.
· By Region
The Asia Pacific bioplastics market is anticipated to hold the largest market share by the end of 2035 among the market in all the other regions. The market size in the region is expected to expand on the back of higher generations of plastic waste and rising production of bioplastics. The Central Pollution Control Board reported that 3.36 million tonnes of plastic garbage are produced in India each year. Moreover, In January 2021, the "Roadmap for Bioplastics Introduction" was created. According to the strategy, Japan should import 2 million tonnes rather than the present 50,000 tonnes of bio-based plastics.
The market research report on global bioplastics also includes the market size, market revenue, Y-o-Y growth, and key player analysis applicable for the market in North America (U.S., and Canada), Latin America (Brazil, Mexico, Argentina, Rest of Latin America), Asia-Pacific (China, India, Japan, South Korea, Singapore, Indonesia, Malaysia, Australia, New Zealand, Rest of Asia-Pacific), Europe (U.K., Germany, France, Italy, Spain, Hungary, Belgium, Netherlands & Luxembourg, NORDIC (Finland, Sweden, Norway, Denmark), Ireland, Switzerland, Austria, Poland, Turkey, Russia, Rest of Europe), and Middle East and Africa (Israel, GCC (Saudi Arabia, UAE, Bahrain, Kuwait, Qatar, Oman), North Africa, South Africa, Rest of Middle East and Africa).
Key Market Players Featured in the Global Bioplastics Market
Some of the key players of the global bioplastics market are Teijin Limited, NatureWorks LLC, Toray Industries, Inc., Toyota Tsusho Corporation, M&G Chemicals S.A., PTT Global Chemical, Showa Denko K. K., Corbion N.V., Solvay S.A., and others.
Do You Have Any Query Or Specific Requirement? Ask to Our Expert:
About Research Nester
Research Nester, which is a leading service provider for strategic market research and consulting services, aims to provide unbiased, unparalleled market insights and industry analysis. These analyses help conglomerates, executives, and industries to take wise decisions for their businesses as well as for their future marketing strategy, expansion and investment among others. We believe that our expertise in the field of market research can help businesses to expand to its new horizon. Our team of research analysts can provide businesses a right guidance at the right time, while our out of box thinking helps our clients to take wise decision in order to avoid future uncertainties.
Contact for more Info:
AJ Daniel
Email: [[email protected]](mailto:[email protected])
U.S. Phone: +1 646 586 9123
U.K. Phone: +44 203 608 5919
submitted by ExcitingBrilliant177 to u/ExcitingBrilliant177 [link] [comments]

2023.06.06 03:34 Yoyokid844 [WTS] [US-CO] Airsoft Closet Cleanout, Guns and Gear: Will Ship! Umarex EliteForce ARX-160 Elite, Umarex IWI CO2 Uzi, Full Metal CO2 Desert Eagle, Marushin 2 Shot Green Gas Derringer, and gear.

Getting out of Airsoft and I am selling everything I own.
Everything goes to a pawn shop next week.
Make me an offer!
You can get everything pictured and listed here for $500 (obo). $1200+ retail, $800+ individually.
I am definitely undervaluing everything because I just need it gone. It’s been sitting collecting dust for 5+ years and I no longer have any interest in airsoft. I’m moving out of my parent’s house because of college and they want it gone too.
Pic w/ Date Verification:
Note: No notes in paypal transaction
Note: Have video of all guns shooting on request
$500 for Everything, open to offers
All prices are negotiable. Bundles are preferred and will be given discounts
Umarex/Elite Force ARX-160 Elite: $180
Good condition, scuffing on barrel and flash hider. Missing rear iron sight, will update if I find it. Has a tight bore barrel, I believe 6.03mm.
Great gun, electric blowback, locking bolt. Chrono’d at 380fps w/ .20g. Single and Full auto. Folding stock w/ quick swap spring system and quick release barrel. Comes with Bravo 1x30 RDS. Retailed $293. Will come with 2 high cap mags unless purchased as a bundle with M4.
Mini Tamiya connector.

Marushin 2 Shot Green Gas Derringer: $40
Like new condition, used in one game
Fun little gun for messing around with. Never was chrono’d, but the manufacturer lists 200fps w/ .20g. Great for game modes where hiding weapons is advantageous, such as hostage.

KWC Full Metal CO2 Desert Eagle: $120
Very Good condition, minor scuffing on fire select switch and edges
Kicks hard. Has full auto and single fire mode. Comes with 1 mag. Evike lists FPS around 370-420 w/ .20g.

WE G17 Green Gas: $80
Good cosmetic condition, iffy mechanical.
Comes with 1 regular mag and 1 Timberwolf extended mag. Currently having an issue where the mag dumps all the gas after 3-4 shots. I’m guessing it’s a lubrication issue but I don’t have the time to diagnose it.

Umarex IWI Uzi CO2 Blowback: $120
Good condition. Cosmetic scratches around mag release, palm safety, and charging handle. Mags have scratches on them. Does not have orange tip
Licensed IWI Uzi. Strong kick. Full auto and single fire. One mag leaks very very mildly. One mag occasionally won’t catch the bolt when empty. No chrono but Evike listed around 380-400fps w/ .20g 2 mags have trouble releasing the CO2 cartridge from the bottom with an allen wrench. Unsure of cause, believed the plastic holding the metal cracked. See pictures

Tokyo Marui P90TR: $75
Poor cosmetic condition, decent mechanical condition. Been spray painted jungle camo. Charging handle spring is missing and the charging handle slides freely.
Great CQB hybrid bullpup design. Comes with 1 low/mid cap imitation bullet mag (hold 50-75rds), and 1 high cap mag (300 rds). Also comes with metal amplifier tip and plastic spray painted flash hider tip. Includes Strike 1x20x30 RDS.
Chrono’d at 315 w/ .20g

Unknown Brand M4: $50
Decent cosmetic condition, unknown mechanical.Don’t know much about this one. Traded for it in a losing trade. Has an elite force lower, but unknown internals. One of the screws holding the motor in is missing. Comes with 2 high cap mags
Chrono’d at 335 w/ .20g.

UK Arms Spring Sniper: $25
Good mechanical condition, acceptable cosmetic condition.
Never got this one chrono’d and I can't find any info on it. Realistically it probably shoots around 350fps, but I’ve honestly got no clue. Comes with a Frontier 2.5x32 scope that I think might actually be a pistol scope.

All guns work to the best of my knowledge, unless otherwise stated but have been sitting for 5+ years. The gas/CO2 guns may have minor issues due to dried seals.
No original boxes for any guns.
Buyer pays shipping unless negotiated, if you buy a gun or bundle I’ll pay for shipping insurance.
First person to buy an AEG gets a free mini deans/T Plug to mini Tamiya adaptor if they want it.
AEGs will not come with batteries because of the hassle/risk of shipping LiPO
Tape on M4 mags is because I wanted to make a double stack/flip mag. It worked pretty well for a few months before it fell apart. Will remove and clean at buyer’s request
Mens Small-Long Desert Camo Surplus Pants: $15
Will sell as bundle with shirt for $25
Military surplus desert camo BDU. 32.5-35.5” inseam, 27 to 31” waist
Marks on knees, May just need a stain treatment and deep wash

Mens Medium-Long Desert Camo Surplus Shirt: $15
Will sell as bundle with pants for $2571 to 75” height, 37 to 41 chest

Tag Airsoft Tac Vest, Brown: $20
Will bundle with helmet for $30
Has attached belt, zip up front. 2 pistol mag pouches on belt. 1 large pouch on right chest. 1 pistol mag pouch on left chest. 3 shotgun shell pouches on left chest. Velcro spot where pistol holster normally goes. 4 magazine pouches, 3 on right, 1 on left.
Comes with patches seen, matching pistol holster, matching dump pouch.

Tan Military style helmet: $15
Has some damage. One strap is held on with a zip tie because the screw is missing (previous owner did this). Adjustable size
Will bundle with tac vest for $30
Comes with gopro mount and battery pouch, as well as the 4 patches pictured.

Voodoo Airsoft Brown hard knuckle gloves, XL: $10
Padded. Scuffing on knuckles, minor tear on left hand

Facemask and Goggles, unknown brand: $10
Impact rated, just don’t remember what brand. I took shots to them fine. Tan goggles, green mask. Goggles have replaceable/interchangeable lenses. Comes with smoke and yellow. Also will include PZ87+ rated glasses too. Valken tac. Not worth selling on their own

Tan Bandana/shemagh: $5

Green Cyber camo pistol holster: $5
Has mag pouch on top

Highland Tactical brown backpack: $15
6 pouches. Molle webbing all over. Amazing bag and I might even keep it if it doesn’t sell

Will sell all clothes/accessories bundled together for $70 OBO
Airsoft Revolver Shells Dan Wesson (12x) + Speedloader: $10
Had the revolver (Dan Wesson) stolen after like 3 days at the field. Only used these a handful of times.

Valken 1s-4s LiPo/LiFe Balance Charger: $5

Tenergy NiMH/NiCD Charger Large Tamiya and Mini Tamiya plug: $5

Buyer pays shipping unless negotiated.
Please reach out with any questions!
Edited a few times to fix dumb reddit formatting issues
submitted by Yoyokid844 to airsoftmarket [link] [comments]

2023.06.05 21:08 KayGee44 "New" Mold Illness patient - have some beginner questions

Hi All,
After "a while" of not feeling great and experiencing some weird symptoms, my wife and I decided to move away from western medicine and visited an Integrative NP. Within 30 minutes of hearing our stories, she promptly tested us for mold toxicity - and voila, both positive for a few different toxin groups (Real Time labs). After getting over the shock, we had the air quality tested in the house, and discovered very poor air quality in the basement/crawlspace of our home. While we never go down there, I believe any emitted toxins would move up through the home (?). We did have the area completely remediated and a subsequent air test confirmed a successful remediation. There is now an industrial size dehumidifier running down there to prevent any recurrence.
Moving on - our NP put us on the beginning of a detox protocol, with binders, liver support and glutathione. It has been only a few weeks, and, if possible, I feel worse. (gets worse before it gets better?). Furthermore, my wife and I are really unsure of what to do in the house with regards to our "stuff."
I've read many articles and subreddits that state "move and throw everything away." While I can appreciate the totality of doing that, its not really financially possible. We are working on replacing some of the fabric items on the main level (couch, rugs, etc), while washing as much as we can with ammonia, EC3, etc). I am also still scouring the house for any other sources of mold.
My question revolves around this - how much can actually be done to ensure you have gotten rid of as much mycotoxin as possible? I haven't seen an air test for mycotoxins, so I feel like we are flying blind a bit. Like I said, I can't afford to move, nor can I afford to throw everything in the garbage. With only the basement/crawlspace having the mold issue - is it plausible that items on the main level (and the 2nd level) might not be infected that they need to be disposed of?
Otherwise, I was just curious if anyone had used any mold doctors in the NY area? Also, has anyone's detox had them feeling worse before they started to feel better?
Thanks for any input - much appreciated!
submitted by KayGee44 to ToxicMoldExposure [link] [comments]

2023.06.05 14:49 kiplet1 [City of Roses] no. 27.1: the Blue room – Bottles & Cartons & Tubs & Boxes

[City of Roses] no. 27.1: the Blue room – Bottles & Cartons & Tubs & Boxes
previous Table of Contents next
tends to crumble
The room is blue, and dark, and very quiet. At the foot of the pallet mounded with white pillows under the angled ceilings he’s sitting, and dark hair eaves his shoulders, a great beard brushes his chest, his back and upper arms are hatched with more hair curling with the curves of sagging muscle, down to his thick round waist. His legs are folded tailor-fashion, bare feet tucked under bare thighs, hands held loosely open on his knees, his cock a-jut, tip of it darkly swollen, glistening, there before his thick-furred paunch. Mustache wide in a simple smile beneath eyes simply, gently closed, there between his beard, his hair, serenely still, so very quiet.
Explosions rip the television screen, chatter of gunfire, Angels comin thick an fast Sarge, and the guy on the beanbag leans back and forth, thumbs and fingers frantically working the controller in his lap. The view on the screen wheels, jerks, dials and meters in the corners whirling, flashing, galloping along in a tight-packed herd of wildly colored centaurs, garish pastel zebra stripes, neon leopard spots, Appaloosa rainbows, all wrapped in khaki saddlebags, human torsos draped in bandoliers, big guns in their outsized hands, Get to cover! Under the cable! Your six, your six! and another explosion. “Shit!” he yelps, tap-tapping, laughing, “Shit!” Over across the room a woman’s headed toward a grand dark staircase, and the other man in the room looks away from the screen, starts after her, “Ellen,” he says, dodging around a dark wood column, “hey, Ellen, wait up.” She stops, a couple steps up, looks down at him. “How long, exactly,” he says, “is he gonna be staying here,” and he points, up the stairs, past her. She shrugs. More explosions, more gunfire, the guy on the beanbag whoops. “Long as he needs,” she says. Her black hair spiky short, the inky lace of tattoos edging the collar of her running shirt.
“It’s just,” he says, at the foot of the stairs, tall and heavyset, cardigan blue. “The occasional overnight guest is one thing, but – ”
“My room, my friend, my business,” she says. “You won’t even know he’s there, Dan, unless you go out of your way.” The loudest explosion yet, and “Shit!” yells the guy on the beanbag. The television’s gone red. She’s turning to climb the stairs. “Ellen!” says the man in the blue cardigan, starting up, “Ellen, he was, what the hell was he doing, wearing my shirt?”
She looks down at him again, and maybe shrugs. “Looks better on him,” she says, and up she goes, up another flight, up under the very peak of the house. At the end of a cramped hall a door, cut at an angle the top to fit the slope of the roof.
The door to that blue room opens, and she steps in, a shadow dressed in black, flashes of silver piping, “Phil?” she says. “You’re, ah, oh.” Stretching out a foot to prod the black huddle of a discarded suit, there on the floor by the door. Splash of yellow within, and blue and white, a rumpled aloha shirt. “Hungry?” she says. “I was gonna go for phở.” Still in the doorway, hand on the jamb. “Did you want some?” Creak of a floorboard as she steps back, out into the hall. “I’ll bring some back,” she says. “You’re welcome to half the bed, if you need it.” The door swings shut. The latch clicks, quietly.

Rattle of glass, yellow bin in his hands, blue letters along the side say Portland Recycles! Clang and clink he sets it down, chock full of bottles, brown glass and green, clear, four or five of them wine bottles long and slender, the rest soda bottles, beer. Squatting he pulls out a wide-mouthed jar, the label mostly torn away, and holds it up in the light. “Fuck,” he says, setting it down. Smacks it, topples it, sends it rolling a hollow rumble away down the linoleum clunk against the wall. “Fuck,” he says, again, rattle and clink, and “shit,” and then “damn.”
Over by the floor-length curtains a brown and green sleeping bag, someone in it, rolling over, a voice, sleep-muzzled, “What.”
“Bits,” he says, “of pickle,” waving a hand, and dark hair swings about the shoulders of his warm-up jacket, blue and grey.
“So rinse it?” The sleeping bag hunches and flops open, whoever’s in it sitting up, a woman, wrapped in a puffy pink and orange parka. “Why should I,” he’s saying, “why couldn’t they,” and he shoves the bin, a chiming crash. “We’ll just have to get some. Bread-and-butter pickles. Trader Joe’s.”
“You want to,” she says, and she’s pinching the bridge of her nose, “you want to buy a new jar of pickles, and, what, eat them all, or throw them out, and the rinse the jar, because you don’t want to rinse the jar?”
“The label on that one,” he says, and then “dammit! It’s the perfect size.” Stomping the length of the room to snatch up the jar, and then through the door. Clomp and clatter, a squawking wrench, the rush of water.
She sighs, crawls out of the sleeping bag, long yellow hair a-dangle from the parka’s fur-lined hood. She slips on a couple of red canvas shoes and heads off carefully through the garbage strewn across the floor, more bottles, empty, all sizes and colors, glass and plastic, quart-sized cartons and half-gallon cartons and little pints and half-pints, cereal boxes and pasta boxes stacked and wrapped together with blue masking tape and black friction tape, towering masts of emptied rolls of plastic wrap and toilet paper, paper towels, plastic tubs tall and squatly broad, whole ranks of them that say Nancy’s in letters of various hues, all laid out in a relatively tidy grid, narrow paths between and through them all where she places her feet, aglets of her undone laces clacking against the floor, until she reaches a wide cleared curl of an aisle of sorts, edges marked with long strips of more blue tape.
He’s at the sink, fiercely scrubbing the jar, “Basic civic duty,” he’s saying, “think of other people, come on.” Slamming the jar on the counter by a dozen or more empty jars and bottles, scrubbed clean, gleaming. Yanking the faucet to shut off the water. “Luke,” she’s saying, “Luke,” and he looks up to see her there, hands stuffed in the pockets of her parka. “The hell you wearing that for,” he says, scooping wet shreds of label from the sink.
“It’s freezing,” she says.
“You know why it’s cold,” he says, dropping the mess plop in a swollen garbage bag that yawns there on the floor.
“So I’m wearing this.”
“You look ridiculous.” He shakes the slop off his hand.
“There’s still a smell,” she says. He’s headed past her, out of the kitchen. “Luke,” she says, following, “Luke. We’re gonna need – ”
“Don’t,” he says, kneeling by an untidy patch of garbage.
“We’re gonna need money,” she says. “Rent. The fifth. It’s next week.”
“We’re always,” says Luke, “gonna need,” plucking up a cereal box, “so get a job,” he says, grabbing another, a clownishly colored bird on the front of it.
“I had a job,” she says.
“Jessie,” he says, “don’t, just,” and he looks up, a shrug. “Your sister’s gonna be here soon. Right? So maybe she’ll have something for you. For us.”
“My,” says Jessie, frowning. “Luke, now is not the – ”
“Don’t,” he says, leaning over to place one of the boxes right next to a yellow plastic jug.
previous Table of Contents next
submitted by kiplet1 to redditserials [link] [comments]

2023.06.05 08:14 fusite123 The Cornerstone of Secure and Versatile Fastening Solutions

The Cornerstone of Secure and Versatile Fastening Solutions
Fasteners play a vital role in numerous industries, providing stability and strength to various structures and products. Among the vast array of fastening options available,hexagon socket head bolts have emerged as a cornerstone of secure and versatile fastening solutions. With their unique design and practicality, these bolts have revolutionized industries such as construction, manufacturing, and automotive, delivering exceptional performance and reliability.
Hexagon socket head bolts, commonly known as Allen bolts, are fasteners with a cylindrical shaft and a hexagonal recess at one end. This recess, often referred to as an Allen key or hex key, provides a secure and reliable grip for tightening or loosening the bolt. Hexagon socket head bolts offer several advantages over other fastening options, making them a preferred choice in numerous applications.
One of the key advantages of hexagon socket head bolts is their compact design, which allows for tight and confined installations. The recessed hexagonal shape enables the use of smaller tools, such as Allen keys or hex wrenches, providing easy access to fasteners in tight spaces. This feature makes hexagon socket head bolts particularly valuable in applications where traditional wrenches or other fastening tools are not practical or accessible.
The strength and durability of hexagon socket head bolts also contribute to their popularity. They are designed to withstand high loads and provide a secure and permanent connection between components. The cylindrical shaft distributes the load evenly, minimizing stress concentrations and reducing the risk of failure. This reliability is crucial in industries where structural integrity and safety are paramount, such as construction and automotive.
Furthermore, hexagon socket head bolts offer excellent resistance to vibration and loosening. The recessed hexagonal shape provides a tight and secure fit, minimizing the chances of bolts becoming loose due to constant vibrations or movements. This feature is particularly advantageous in machinery and equipment, where stability is essential for optimal performance and safety. The resistance to loosening ensures that assembled components remain securely fastened, reducing the risk of accidents or operational disruptions.
Versatility is another key attribute of hexagon socket head bolts. Their standardized design and wide availability of sizes and materials make them compatible with a broad range of applications. From construction and manufacturing to automotive and electronics, these bolts find utility in countless industries. Whether securing machine parts, assembling furniture, or installing electrical components, hexagon socket head bolts offer a reliable and versatile fastening solution.
submitted by fusite123 to u/fusite123 [link] [comments]

2023.06.05 05:36 ColoHusker Moving/clear out sale, mostly tools, woodworking, remodeling items

If you are interested in something, lmk and I can send or upload pics and pull model numbers. If you are interested in a bunch, we can setup a time to come by.
Sometime the week of 6/12 whatever is left will be donated to the tool library/maker spaces/Habitat Restore.
Corded power tools in great shape with storage cases if they came with them.
Large corded tools:
Pneumatic tools
Misc Tools
Edit: had a work issue come up this AM. Getting back to it. I apologize & thx for your patience!
submitted by ColoHusker to denverlist [link] [comments]

2023.06.03 19:00 Just_Regret69 Sockets, wrenches, extensions, combo wrenches all mis matched want to clean this up

Hey so when I was 17-18 I built my box for automotive work, snap-on for 3/8” my go to daily size, SK for 1/2” and then craftsman for sae sockets since I worked in imports, snap on for metric, box ends were proto, cornwell for the 1/4 drive , matco for the impact
Then the craftsman wrenches I used for the lower control arm hack that was the go-to back in the day
I wanted to clean this up. I’m now a machinist (let the other guys use my tools since they were using some literal garbage before) like stuff the owner of the shop picked up for free off of giveaways or yard sale take it all for $1 type stuff
I have to clean out a drawer for my measuring equipment, we’re doing shop tours and my go to of leaving my $400 calipers and my $250 test indicators stuck to magnets on the side of the machines won’t be a great idea…
So I’m looking to clean up the suppliers on some of these tools. Like cornwell I haven’t talked to a rep in 20 years at least, I wanted those $100 off screwdriver set coupon to go with my snap on screwdrivers but couldn’t find a dealer… so I’d be SOL if my cornwell stuff broke
What is the current leader for consumer grade stuff? Was going to maybe start down grading my tool collection.
I make $18/hr and my tools are nicer than the millionaire owner’s stuff so it’s probably not a good idea to just have my box sitting in this shop
submitted by Just_Regret69 to Tools [link] [comments]

2023.06.03 15:32 bedroom_fascist Suggestion sought for specific tool

Hi. I have about 20 (?) FMIC guitars, usual assortment of Strats, Teles, JMs, Jags and Mustangs.
From saddle screws to the little screws inside JM thimbles, the hex sizes are quite small. I have the little allen wrenches included with the guitars, and a couple of multi-tools (RIP Guitool), but would really, really like a multi-hex-tool that collects all the smaller sizes.
Something like this but for the smaller sizes.
Any regular techs have a recommended product you like using?
submitted by bedroom_fascist to guitarrepair [link] [comments]

2023.06.03 03:23 savingtheinternet Got home inspection back. How much is all this going to cost us? Stressed seller.

Called two electricians today, but no return call for estimate yet. I’m stressing out here, how much will all of this cost us?
We thought everything was all good.
  1. Correct Yellow CSST so it is electrically continuous and direct bonded to the ground system.
  2. Heat pump requires a 25 amp maximum breaker.
  3. Main neutral conductor strands have been severed. Condition due to terminal bar hole will not accommodate size of conductor provided. Provide approve lug to accommodate size.
  4. Furnace requires a 15 amp maximum breaker.
  5. Adjust the height of garage door sensor eyes to 6” maximum (currently at 11”)
  6. Provide missing strain release clamp at garbage disposal electrical connection.
submitted by savingtheinternet to Electricity [link] [comments]

2023.06.03 03:20 savingtheinternet Got home inspection back. How much is all this going to cost us? Stressed seller.

Called two electricians today, but no return call for estimate yet. I’m stressing out here, how much will all of this cost us?
We thought everything was all good.
  1. Correct Yellow CSST so it is electrically continuous and direct bonded to the ground system.
  2. Heat pump requires a 25 amp maximum breaker.
  3. Main neutral conductor strands have been severed. Condition due to terminal bar hole will not accommodate size of conductor provided. Provide approve lug to accommodate size.
  4. Furnace requires a 15 amp maximum breaker.
  5. Adjust the height of garage door sensor eyes to 6” maximum (currently at 11”)
  6. Provide missing strain release clamp at garbage disposal electrical connection.
submitted by savingtheinternet to AskElectricians [link] [comments]

2023.06.03 03:19 savingtheinternet Got home inspection back. How much is all this going to cost us? Stressed seller.

Called two electricians today, but no return call for estimate yet. I’m stressing out here, how much will all of this cost us?
We thought everything was all good.
  1. Correct Yellow CSST so it is electrically continuous and direct bonded to the ground system.
  2. Heat pump requires a 25 amp maximum breaker.
  3. Main neutral conductor strands have been severed. Condition due to terminal bar hole will not accommodate size of conductor provided. Provide approve lug to accommodate size.
  4. Furnace requires a 15 amp maximum breaker.
  5. Adjust the height of garage door sensor eyes to 6” maximum (currently at 11”)
  6. Provide missing strain release clamp at garbage disposal electrical connection.
submitted by savingtheinternet to HomeImprovement [link] [comments]

2023.06.03 03:18 savingtheinternet Got home inspection back. How much is all this going to cost us? Stressed seller.

Called two electricians today, but no return call for estimate yet. I’m stressing out here, how much will all of this cost us?
We thought everything was all good.
  1. Correct Yellow CSST so it is electrically continuous and direct bonded to the ground system.
  2. Heat pump requires a 25 amp maximum breaker.
  3. Main neutral conductor strands have been severed. Condition due to terminal bar hole will not accommodate size of conductor provided. Provide approve lug to accommodate size.
  4. Furnace requires a 15 amp maximum breaker.
  5. Adjust the height of garage door sensor eyes to 6” maximum (currently at 11”)
  6. Provide missing strain release clamp at garbage disposal electrical connection.
submitted by savingtheinternet to RealEstate [link] [comments]

2023.06.03 03:17 savingtheinternet Got home inspection back. How much is all this going to cost us? Stressed seller.

Called two electricians today, but no return call for estimate yet. I’m stressing out here, how much will all of this cost us?
We thought everything was all good.
  1. Correct Yellow CSST so it is electrically continuous and direct bonded to the ground system.
  2. Heat pump requires a 25 amp maximum breaker.
  3. Main neutral conductor strands have been severed. Condition due to terminal bar hole will not accommodate size of conductor provided. Provide approve lug to accommodate size.
  4. Furnace requires a 15 amp maximum breaker.
  5. Adjust the height of garage door sensor eyes to 6” maximum (currently at 11”)
  6. Provide missing strain release clamp at garbage disposal electrical connection.
submitted by savingtheinternet to u/savingtheinternet [link] [comments]

2023.06.02 12:30 iapsfusa How to Identify Commercial Trash Containers for Sale

How to Identify Commercial Trash Containers for Sale
Maintaining a tidy and organized workplace requires choosing the appropriate commercial waste containers. With so many possibilities available, it's crucial to comprehend the essential elements to consider when selecting commercial trash containers for sale. We'll review some helpful advice in this blog post to assist you in finding the best garbage cans for your requirements and making an informed decision.

Access Your Needs

Consider your unique needs before buying commercial trash containers. Consider the size of your company, the amount of waste it produces, and the area available for container placement. Determine if you require containers for indoor, outdoor, or combined uses. This first assessment will provide explicit knowledge of your demands, allowing you to select the right kind and size of containers.

Consider Material And Durability

Commercial trash cans come in various materials, but fiberglass is frequently used. Fiberglass containers offer sturdiness, corrosion resistance, and the capacity to tolerate severe weather. Additionally lightweight, they are simple to handle and move around. To fit your company's style, fiberglass containers can also be customized with various colors and finishes.

Look For Functional Features

When choosing commercial garbage cans, consider the features that will improve usability. Look for containers with tight-fitting lids to avoid odors, pests, and unauthorized access. For added convenience, specific containers could include built-in ashtrays or recycling chambers. Accessible openings or doors can also increase the effectiveness of garbage disposal. You can streamline your waste management procedure and uphold a cleaner and more organized environment by prioritizing functional features.

Explore Dual-Purpose Options

Consider dual-purpose choices like commercial planters to get the most out of your commercial trash cans. With the help of these containers' built-in plants, you can add greenery to your outdoor areas while efficiently managing garbage. This creative strategy improves your commercial space's visual attractiveness while serving practical needs.


When choosing the best business garbage containers for sale, it's essential to carefully analyze your unique requirements, materials, durability, and valuable aspects. You may select the ideal garbage cans to keep a clean and organized atmosphere for your business by evaluating your needs, choosing durable materials like fiberglass, prioritizing valuable features, and looking into dual-purpose solutions. Invest in high-quality garbage cans that support your waste management objectives and make your workplace more comfortable and productive.
submitted by iapsfusa to u/iapsfusa [link] [comments]

2023.06.02 04:46 Gameran Dexter Flux Presents: Sound-Off! - Part Three

We return from the commercial, a five-minute video that was just a still image of Dexter Flux.
Babaganoush: The following contest is scheduled for -
Crowd: ONE FALL!
Javier smiles at this response, and he’s clearly got confidence that he’s shook the rust off.
Babaganoush: ...And it is for the WiR Tag! Team! Championship!
Babaganoush: Introducing first, the challengers…
Shit, you judge me on my appearance… face value ennat…
As “Inglorious” plays, King Mustafa exits from behind the curtain with Eddie Skelter following closely. Mustafa has a suit - a blindingly light-blue Christian Dior one - on over his gear and he curses at the crowd, but Eddie, dressed in red sweats, just mean-mugs and gets up in the faces of a few front row spectators.
Mann: Look, I - I know why people hate these lads. I really do! Not blessed with great social graces and they get off on getting ill-gotten cash and hurting people. But they make for a tremendous team, both covering each other’s flaws and fighting as more than the sum of their parts.
The two of them hop up on the ring apron and remove their outer gear - horrifyingly enough, they take off their pants to reveal their short tights - and point to their chests: Mustafa has a lion symbol on his blue gear, while Eddie has a rose symbol on his red gear.
Babaganoush: …From the United Kingdom, weighing in at a total of 445 pounds, they are King Mustafa and Eddie Skelter… TWO! SMOKING! BARRELS!
Woodbridge: They’re right! They should say it! England DOES suck! That’s why guys like Brendan Byrne came here! He’s a good boy and he’s smart!
Mann: Moving on, and I’d like to apologize to our UK-based fans… as much respect as I have for 2SB, they’ve got their work cut out for them. Because here comes…
Babaganoush: And now, introducing the titleholders…
There is the completely incongruous sound of a blast on a Viking war horn before the jazz classic “Cantaloupe Island” begins to play and champions Jim Baker and Dexter Flux come from behind the curtain together, belts around their waists. Baker has on a chainmail shirt, while Dexter is in a huge fur cloak, which doesn’t even seem to be making them sweat. Their faces are painted with blue woad designs.
Flux: OC BABY!
Mann: The crowd in Dexter Flux’s home region are giving him love.
Woodbridge: They’re wearing the belts! As it should be! Too much of this damn “I’ll put it over my shoulder” nonsense in wrestling these days.
Mann: And the rejuvenated Horde seems to be taking their name very seriously, judging by those outfits!
Woodbridge: What? What’s that mean?
Mann: Because of the barbarian type clothes -
Woodbridge: I still dunno what you’re talking about.
Mann: sigh I finally am starting to empathize with Allen Paisner.
On their way to the ring, Baker and Flux hand out a bunch of fist bumps; they take a brisk walk up the stairs, get their entrance gear off and hand it to Maurice Chondon for safekeeping, and Baker steps on the middle rope to help Flux in - Dexter is apparently adamant about starting.
Babaganoush: …from Orange County, CA -
Babaganoush: …and Cincinnati, OH, weighing in at a total of 425 pounds, they are the WiR Tag Team Champions - Jim Baker and Dexter Flux, THE HORDE!
Mann: Dexter Flux clearly going to be in the match first, and it looks like out of 2SB, Eddie Skelter wants to start…
Referee Harry Undersach checks over the four competitors - everyone complies even though Mustafa calls him a “chi chi man” - and signals for the match to begin!
Skelter offers a lockup to Flux, which the champion accepts, doing his best to ignore King Mustafa pounding on the ringpost and goading him while making rude English gestures at Baker from across the ring. The two wrestlers in the ring grapple - Skelter puts a facelock on Flux, goes to lock his right arm as well, but Flux gracefully gets out and tries to get a headlock on Skelter. Skelter has none of this and pushes Flux off, but Flux gets him down with an arm drag!
Mann: Both of these men are accomplished technical wrestlers. Skelter is obviously more a traditional mat wrestler, Flux is well-known for his high flying, but they’re going to do more of feeling each other out like this, I think.
Skelter attempts to put a wrist hold on Flux while the two are both down, but Flux gets out of his grip and kips up, and Skelter gets into a crouch, rising slowly and deliberately with both his eyes fixed on Flux, who assumes a readied stance but doesn’t go to attack Skelter yet. They re-assume a lockup, seemingly out of mutual agreement - this time, Flux manages to snap off a headlock takeover, bringing Flux to the ground again! Instantly he tries for a jumping elbow drop but Skelter rolls out of the way, and Flux makes a smooth recovery, landing on both his hands and pushing back up.
Woodbridge: Both guys still actin’ wary. For now. Even Flux didn’t commit too hard to that elbow drop. Woulda been cool to see him break Skelter’s nose like that, hah.
Mann: Be that as it may, I feel like this pace will pick up soon!
Mustafa shouts a little more while Baker looks on calmly but still at the ready. The two stare each other down, and Skelter decides to take the first swing, throwing a fast but vicious jab towards Flux’s face. Flux, however, is able to dodge backwards and follow through with a forward jumping elbow! It hits Skelter square in the chest and he winces but SLAPS Flux right across the right cheek!
Woodbridge: The level of disrespect!
Mann: It’s still a legal strike, Mark. And it’s a treasured part of Eddie Skelter’s arsenal.
Mustafa is obviously pleased at the pimp smack, while Jim Baker looks irate, and is about to gesture for Flux to come back to their corner and tag him in. But Baker thinks the better of it, letting Flux avenge the insult himself instead. This he does, with a nice uppercut to Skelter’s jaw, but even as the Brit reels, before Flux can hit a follow-up attack, Skelter ducks behind him and grabs at his arm, a hold which Flux spins out of. But Skelter isn’t unprepared for this and knees Flux in the gut! He brings a chop down towards Flux’s head as Flux doubles over, but Flux is able to block it - Skelter then locks Flux’s arm and attempts to drop Flux with a Russian legsweep - Flux dodges and goes behind but Skelter turns around in time and throws a hard left-handed punch which Flux counters with an elbow, and both men’s strikes connect! They both stagger!
Woodbridge: Both of ‘em have their fire up! Kill him, Flux!
Mann: No easy task! Now it’s going to be a question of which man is forced to tag out first!
It’s Skelter who gets his head clear first and dives in for a double-leg takedown, which Flux blocks by splitting his legs - Skelter goes under and uses the leverage to attempt to lift Flux onto his shoulders - but Flux is ready for it! He clamps his legs and THROWS skelter with a modified headscissor takedown!
Woodbridge: That tijeras came straight from Guadalajara!
Mann: And now both competitors are on the mat!
Skelter sits up and winces and Flux scrambles to take advantage, but Skelter grabs his ankle and flips him to the mat with an ankle pick! Suddenly both men get about the same idea at the same time - Skelter takes further hold of Flux’s ankle but Flux tries to grapevine one of Skelter’s legs! They battle for a hold on the mat!
Crowd: LET’S GO DEXTER LET’S GO! clap clap LET’S GO DEXTER LET’S GO! clap clap
Meanwhile, dark gray clouds are gathering in the sky above the ring. The venue turns on some extra lights for better visibility.
Woodbridge: We’re onto Indian leg wrestling now!
Mann: That, and it looks like rain.
Woodbridge: You think the Tongva Indians ever used leg wrestling to do a rain dance?
Mann: …I do not think the one thing has to do with the other. Anyhow, the battle in the ring’s been VERY evenly matched so far.
Whilst Skelter goes for a modified figure-four leglock, Flux has something else in mind. He suddenly grips both of Skelter’s ankles, bridges onto his neck, and surprises Skelter by forcing him into a pin!
Woodbridge: DAMN!
Mann: Whoa, a flash pin attempt!
The pin catches Skelter off guard but it’s clearly not enough. Both men spring to their feet and Skelter tries another double leg takedown attempt which is fended off by a flurry of overhead elbows by Flux! Skelter holds his head and decides he’s had enough for now, backing into his corner and tagging in the furiously waving hand of King Mustafa.
Mann: His partner Eddie Skelter may have started off, but the big man of Two Smoking Barrels has wanted in all match so far.
Mustafa leaps in the ring and curses at the crowd once more.
Woodbridge: Dexter Flux is standing firm!
Mann: He did well against Skelter, who was his equal in terms of physical strength, but I have a feeling King Mustafa’s going to absolutely overpower him now!
Mustafa steps right up to Flux and proceeds to slap him in the left cheek!
Mann: The cycle of disrespect is completed by Skelter’s teammate!
Flux backs off, before returning back in for a lockup with Mustafa, who uses his size advantage to throw Flux back into his corner, where he tags Skelter back in, and the two stomp Flux down into the corner. Skelter then immediately tags back out to King Mustafa.
Woodbridge: I can’t judge. Literally can’t. Used that tag team tactic there too many times to count.
King Mustafa once again overpowers Flux, using her superior size to launch him into the hard camera turnbuckle. He attempts to charge in, but Flux skitters out of the way! Flux tries to bring down King Mustafa with a kick to the knee, but he doesn’t budge. King Mustafa blocks an attempt at a strike, and throws Flux by the arm off the ropes! As Flux careens towards the opposite end, Baker sticks out his hand, and smacks Flux on the shoulder!
Woodbridge: That’s a legal tag!
Flux baseball slides underneath King Mustafa, who is unaware the tag has been made, while Baker comes in and pearl harbors him! Baker takes control with an overhand right, a blow to the chest, and a Russian leg sweep, before attempting a body slam, which King Mustafa is too large for. Mustafa offers Baker a test of strength, but before Baker can even accept, he kicks him in the gut.
Mustafa scoops Baker up with ease, and delivers a gorilla press slam, taking a moment to flex for the unappreciative crowd before continuing his assault. Mustafa wrenches the arm of Baker, before tagging Skelter back in. Skelter climbs up to Bret’s Rope, and while Mustafa wrenches the arm, Skelter dives off, and delivers a double axe handle to the trapped arm!
Mann: Some solid teamwork here by The Barrels!
Skelter puts the larger Baker on the mat with a clubbing blow to the back, before delivering a fist drop to the skull. Skelter, relishing his small victory, backs off the ropes and prepares an elbow drop, but Baker rolls out of the way, and tags Flux back in! Flux charges in once again to meet Skelter… and is caught instantly with an arm drag. Skelter brings him down to the mat, and applies a sleeper hold…
But Baker charges back into the ring, and breaks it up! King Mustafa enters the ring to try and chase Baker off, drilling Flux with a shoulder tackle as soon as he lands on his feet with a kip-up, planting him back on the ground. Mustafa returns to his corner, while Skelter ascends a turnbuckle!
Mann: Not something we’re used to seeing! Skelter wants to beat Flux at his own game!
Skelter dives off the top, attempting a flying forearm… and falls short. As he tries to get back to his feet, Flux batters him with a closed fist, before whipping him off the far ropes, but Skelter is able to turn it around. Flux attempts a sunset flip to regain control, but Skelter simply pops down and pokes him in the eye.
While Skelter is told off by the official, King Mustafa sneaks into the ring to deliver a stomp to Flux, before skittering back to the apron. Skelter picks up Flux, to deliver a forearm, before walk-dragging Flux over to the corner by his hair, and tagging Mustafa back in. Skelter holds Flux by the hair, and Mustafa stomps his boot before delivering a knee to the stomach as Skelter heads back to the apron. Mustafa whips Flux, and as he returns, scoops him up for a powerslam, before rising to his feet, walking to the ropes, and preparing a knee drop, which Flux avoids! Flux crawls on his knees over to the corner before Mustafa can catch him, and tags Baker back in! Flux takes position on the apron, one foot on the second turnbuckle.
Finally, the sky has opened up! It begins to rain on the ring, the crowd, and even the announcers!
Mann: Didn’t I say it was going to rain?
Woodbridge: It’s not bothering anybody one bit!
Baker charges in, delivering a pair of punches to try and slow down Mustafa, but they fail to knock him off his feet. Baker tries charging in for a clothesline, Mustafa ducks, but as Baker approaches, he attempts a sunset flip!
Mann: Uncharacteristic offense from Baker!
Woodbridge: I’ll say! Baker’s a great power guy, but I didn’t think he’d even ever seen one of those!
Mustafa refuses to go down, but as he struggles, Flux suddenly leaps from the apron to the top turnbuckle, before flying in with a dropkick! Mustafa stumbles, and Baker pulls him down for the rollup!
Woodbridge: Oh shit!
Mann: Huge missile dropkick, and the mat’s slick with rain now! Mustafa had to go down!
Skelter breaks up the pin! Skelter then grabs Flux by the hair again, and darts him shoulder-first into his own ringpost. He bends the aching Flux backwards and grabs his neck for a dragon sleeper
Mann: He won’t be able to submit Flux unless Mustafa gets tagged out!
Woodbridge: I don’t think he wants to! This is gonna be Lack of…
Skelter twists Flux around and fires off a fat open-palm thrust to Flux’s throat, making Flux sputter and drop to his knees!
Woodbridge: TRUST! Nasty!
Mustafa, who has recovered from the takedown, then proceeds to deliver an elbow to Flux’s crown! The two work over their opponents in the corners- Skelter attempting to ground Flux with kicks to the knee, Mustafa using his large arms to deliver repeated clotheslines, and with Flux and Baker tied up in opposite corners, Two Smoking Barrels attempt to whip their Horde counterparts into each other! As the two partners head on a collision course, Baker suddenly drops down, in back-body drop position to Flux, who lands on his feet!
Flux continues his momentum by delivering a running knee to King Mustafa, who is in his corner, before charging back a Baker, who offers a hand, and gives Flux a launching pad to deliver a flying forearm to Skelter! Skelter flops out of the corner, and out of the ring, and with the support of Knott’s Berry Farm behind him, Flux charges, and flies through the ropes with a dive that takes out both men!
A few members of the crowd begin to open up umbrellas, including the fan who got The Milkman’s earlier
Baker approaches Mustafa in the corner, and attempts to lift him to the second rope, but gets met with a boot for his troubles. Mustafa trades places with Baker, and pops him in the jaw, before delivering another one to the ribs, and a third to the temple. Baker blocks a fourth attempt, and turns it around on Mustafa! Baker unloads with a series of right hands of his own! Mustafa powers Baker out of the corner, and throws him to the opposite. Mustafa charges in, but as he tries to charge in, Baker moves out of the way, and attempts another rollup! This time he’s able to get Skelter off balance!
Flux ascends from the grass to the apron, and Baker tags him in! Baker attempts to lift Skelter once again, but struggles to, as he breaks free, but Flux delivers a dropkick, and Mustafa stumbles into Baker’s arms, who lifts him for a scoop slam!
Mann: He did it! He slammed him!
Woodbridge: This is where Baker shines! Not only displaying his power, but being great in the clutch!
Skelter tries to get in the ring again, but Flux meets him with a superkick! Skelter tries to keep his balance, but slips on the wet Apron and drops to the grass! Flux grabs the arm, and tags Baker back in, who delivers a clothesline to the trapped Mustafa, dropping him again. Flux gets the tag back in, and ascends the ropes…
And delivers Quantum Flux! He blasts down onto the King, into a puddle of rainwater forming in the center of the ring!
Skelter tries to scramble back to the ring to make the save, Baker meets him, and holds him down! Flux scrambles into the cover!
Mann: And The Horde are victorious!
Woodbridge: And damn do they deserve it!
Babaganoush: Your winners and STILL WiR Tag Team Champions, at a time of twelve minutes and forty-three seconds, The Horde!
Flux and Baker hug it out in the ring, holding their tag belts high. Tony “The Milkman” Stevens emerges from the back, knee wrapped in medical tape and casts, limps to the ring, and raises the hands of his stablemates! Everyone is going crazy, especially because the hometown boy defended the stable’s belts by getting the pin!
Flux and Baker each get up on a turnbuckle, holding their tag belts up high, while in the ring, Stevens stands alone in the middle, one leg down, hair slicking back over his face from rain.
Mann: Fans at home, this has been Sound Off! The weather outside has turned frightful, but this show has been delightful! I have been Shay D. Mann filling in for Allen Paisner, alongside Mark Woodbridge. Take us home, Woodbridge!
Woodbridge: I finally feel confident in saying this - it has felt like a wonderful, shine-drunk dream so far - but folks, we are so fucking back. For all of the incredible fighters in WiR, for our whole staff and crew, and for my short-term broadcast partner Shay D. Mann, this has been Sound Off, and I have been Mark Woodbridge - gooooood night everybody!
submitted by Gameran to wrestlingisreddit [link] [comments]

2023.06.01 20:40 rangernumberx Respect the Tomatoes (Attack of the Killer Tomatoes)

"Get over here, gonna need your help fighting the Red Menace again." "Communists, huh?" "Worse. Tomatoes!"
In the late 70s, the United States of America were terrorized by the greatest threat they had ever faced. Tomatoes, unable to be reasoned with, unable to be stopped, unable to hold back their relentless bloodlust. It took a group of specialists put together by the president to discover their one weakness, using it to negate the fruit threat. Ten years of peace passed, aided by the U.S. Congress outlawing tomatoes, and the new generation grew up unknowing of the menace once posed. This was until Professor Gangreen found a way to transform tomatoes into personal soldiers, planning on reminding the world of why they once feared them as he became its ruler.


1 - Attack of the Killer Tomatoes
2 - Return of the Killer Tomatoes!
3 - Killer Tomatoes Strike Back!
4 - Killer Tomatoes Eat France!
C-# - Attack of the Killer Tomatoes novelization, chapter #


Killing / Eating


Blunt Force


Flying / Throwing Themselves

Unique Forms



Music Effects


Fear Induction

Other Capabilities


submitted by rangernumberx to respectthreads [link] [comments]

2023.05.31 19:41 VirgiVirgi_99 OPEN ROOM IN SOMERVILLE

**Available now for short term or year lease**
RENT: $950/month
Hi everyone! We are three girls looking to fill an open room in our 4 bed/1 bath apartment in East Somerville. The apartment is steps away from the 101, 90, and 89 bus stops to Sullivan Station, Assembly Row, Malden, and Davis Square. You can also walk from our apartment to the Orange Line at Sullivan Square (13 min walk) and Assembly Row (17 minute walk), and to the Green Line at East Somerville Station (13 minute walk).
Near a ton of restaurants and two super cute coffee shops! Stop & Shop is right down the street. When there isn’t construction going on, we also have a nice granite patio behind the building with a fire pit and grill.
  • Large room with plenty of sunlight and a closet
  • Furnished with a queen sized bed, sheets (if you need them) and two dressers
  • Stone fireplace (can’t actually use it but can decorate with candles, etc)
  • 4 bedroom/1 bath
    • We all have varying work/school schedules so sharing one bathroom has not been a problem at all!
    • Bathroom has plenty of storage space
  • Large kitchen with plenty of storage space
    • Garbage disposal
    • Dish washer
    • Keurig
    • Shared dishes, pots/pans, and utensils
  • Coin-op washer and dryer on the first floor of the unit. Also down the street from a laundry mat
  • Cozy living room with a pullout couch for guests
    • We LOVE watching Love Is Blind and other trashy tv shows together
  • Utilities will be around $90-$100 a person/a month
    • Hot wategarbage/sewer included with rent
  • Sadly no pets :(
  • Street parking available with Somerville parking pass
  • Abby is here from New York studying law at New England Law Boston and works part time at a corporate immigration firm downtown
  • Virginia is here from Milan, Italy studying for her Masters in Bioengineering
  • Fabiana is here from Naples, Italy pursuing a PhD in Biology and works at MGH
Added to the post are some pictures of the room! Please DM me if you’re interested!
submitted by VirgiVirgi_99 to bostonhousing [link] [comments]

2023.05.31 19:11 Linemanbag Essential Gear for Every Professional: Carrying a Large Best Lineman Tool Bag at Any Time

Essential Gear for Every Professional: Carrying a Large Best Lineman Tool Bag at Any Time

Best Lineman Tool Bags


As a professional lineman, your work requires not only skill and expertise but also the right set of tools. To efficiently handle the demanding tasks and challenges in the field, having a reliable and well-organized tool bag is crucial. The importance of carrying a large best lineman tool bag at all times and highlighting the essential tools every lineman should have at their disposal.

The Need for a Large Best Lineman Tool Bag:

When working as a lineman, you encounter a wide range of situations that demand a diverse set of tools. Carrying a large lineman tool bag ensures that you have everything you need readily available, allowing you to work efficiently and safely. A well-designed tool bag provides ample space, compartments, and organizational features, making it easier to locate and access your tools when you need them the most.

Essential Tools for Every Lineman:

Pliers and Cutters:
Pliers and cutters are fundamental tools for any lineman. Insulated high-leverage pliers, diagonal cutters, and long-nose pliers are among the essentials. These tools help you handle wires, cables, and connectors with precision and ease.
Screwdrivers and Nut Drivers:
A comprehensive lineman tool bag should include a variety of screwdrivers and nut drivers. Different sizes and types, such as flathead, Phillips, and square drive, allow you to handle a wide range of fasteners found in power distribution systems.
Adjustable wrenches and socket wrenches are indispensable when working with bolts, nuts, and fittings. Including a set of open-end and box-end wrenches ensures you can tackle various sizes and types of fasteners.
Voltage Testers and Meters:
Safety is a top priority for linemen, and voltage testers and meters play a crucial role in ensuring a secure work environment. Including a non-contact voltage tester and a quality digital multimeter in your tool bag enables you to quickly and accurately assess electrical conditions.
Insulating Tools:
Working with live electrical systems requires specialized insulating tools, such as insulated screwdrivers, pliers, and cutters. These tools provide an extra layer of protection against electrical shocks, minimizing the risk to lineman's safety.
Safety Equipment:
Alongside your tools, your lineman tool bag should also have essential safety equipment. Items like gloves, safety glasses, hard hats, and high-visibility vests protect you from potential hazards while working in the field.


Carrying a large best lineman tool bag is an absolute necessity for every professional lineman. By having all the essential tools readily available, you can work efficiently, respond to various challenges swiftly, and ensure your safety. Invest in a high-quality tool bag, organize your equipment effectively, and prioritize the inclusion of crucial tools and safety gear. With the right gear at your side, you'll be well-equipped to handle any task that comes your way and continue providing essential services to power distribution systems.
submitted by Linemanbag to u/Linemanbag [link] [comments]

2023.05.31 14:52 0110101100101110 Are these shoes trash or can they be reused/donated?

Are these shoes trash or can they be reused/donated?
I have a pair of Allen Edmonds Seven Frontinos with pretty bad soles. They've always been a bit small for me. I'd prefer not to throw them in the garbage if someone can get some more use out of them. Do they need to be resoled and would anyone find that worth it to do? They are size 9 D
submitted by 0110101100101110 to allenedmonds [link] [comments]

2023.05.30 00:41 Intelligent-Bend5032 Room Sublet at 7th Street Station

Room Sublet at 7th Street Station
I am looking to re-let my room for the summer at 7th street station. So from June 20 to August 31st. It is a four bedroom townhome with privacy to bedroom and bathroom and a walk-in closet. You will be paying about 874 for July and August. Dm me if interested.

Floor plan

Apartment Features
submitted by Intelligent-Bend5032 to OregonStateUniv [link] [comments]

2023.05.29 23:54 Formal_Pea9167 I Watch Paige's Week At Home Blog So You Don't Have To, I'm Serious The Vlog Is Like An Hour Long Don't Do This To Yourself

A day late but we're here, my little cheeto eaters! Remember as always to grab your bingo cards and let's get our little long weekend slumber party going. This whole fucking thing is FORTY MINUTES LONG, you're all lucky that my sibling who was supposed to spend the day chilling at my place has apparently forgotten that plan.

submitted by Formal_Pea9167 to PLSnark [link] [comments]